Sony SNC-RS44N User Guide - Page 99
Using Panorama Creator — Creating a Panorama Image, Starting the Panorama Creator
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Others Using Panorama Creator - Creating a Panorama Image The Panorama Creator function of SNC toolbox allows you to create a panorama image to be displayed on the main viewer. Using the panorama image, you can move the camera to a desired position simply by clicking on the image. This section explains setup and operation of Panorama Creator. Starting the Panorama Creator 1 Select the camera to create the panorama image from the Device list. 2 Click Panorama. Panorama Creator opens. Using Panorama Creator Viewer The created panorama image is displayed in the upper viewer. Pan-Tilt limit Specify the camera movement area on the panorama image. Drag the mouse to draw a rectangle within which the camera movement is limited. You can enlarge, reduce or move the created rectangle. To erase the rectangle, rightclick the mouse. Note The edges of a panorama image may not be displayed correctly when the camera is zoomed in. Make Starts shooting to create a panorama image (a complete 360-degree panorama image). Tip • Panorama images have two formats: Rectangle and Round. • The exposure and white balance settings are fixed while a panorama image is being created. To create a clear panorama image, set Exposure mode to Full auto and White balance to Auto in the Camera menu and point the camera at the main subject before starting shooting. File open Allows use of a Bitmap or JPEG image file instead of a panorama image. Note • Only Rectangle is available. • The size of the image in the file should be 320 × 90 pixels (horizontal/vertical). Other image sizes are not supported. Save You can save the panorama image in a file. Note Only Rectangle panorama images can be saved. Send Transmits a panorama image converted into a JPEG file to the camera. Both Rectangle and Round panorama images are sent to the camera. Creating and transmitting a panorama image 1 Click Make on the Main tab to start shooting. A panorama inage will be created. Note Do not perform settings of the camera or move the camera during shooting. 2 Specify the camera movement area by dragging the mouse to draw a rectangle on the panorama image. The specified camera movement area will be effective when the panorama image is saved in the camera. 3 Click Send to transmit the panorama image to the camera. The panorama image is saved in the camera. You can use the saved panorama image when you control panning and tilting from the main viewer. 99 Using the Supplied SNC toolbox