Sony SNC-RS44N User Guide - Page 45
Wireless Tab — Setting of wireless connection, Host name, Domain suffix, IPv6 setting, OK/Cancel - specifications
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Host name Type the host name of the camera to be transmitted to the DHCP server. This setting is valid only when Obtain an IP address automatically (DHCP) is selected in the Network tab. Domain suffix Type the domain suffix of the camera to be transmitted to the DHCP server. This setting is valid only when Obtain an IP address automatically (DHCP) is selected in the Network tab. Note The domain suffix is sent to the DHCP server as FQDN (Fully Qualified Domain Name) information when Host name is set. HTTP port number Normally select 80. If you want to use a port number other than 80, select the text box and type a port number between 1024 and 65535. Note When you have set the HTTP port number to a number other than 80 in the Network menu or in SNC toolbox, access the camera again by typing the IP address of the camera on your Web browser as follows: Example: Setting port number 8000 when IP address is 192.168.0.100 Wireless Tab - Setting of wireless connection Insert the specified wireless card into the CF card slot of the camera, and set the items for connecting to the wireless network. Before setting, read the operation manual and installation manual supplied with the wireless card together with this guide. Verified wireless cards • Sony Wireless Card SNCA-CFW5* sold separately. * SNCA-CFW5 is not available in some countries and areas. For details, contact your authorized Sony dealer. Notes • Before removing the wireless card from the camera, turn off the power of the camera. • The throughput of data transmission/reception via the network cable may decrease when the wireless card is in use. Administrating the Camera IPv6 setting Configure the IPv6 network settings. IPv6 can be used simultaneously with IPv4. Only IPv6-specific details are explained here. For common details, see "IPv4 setting" on page 44. On/Off To use IPv6, select On. Prefix Enter the Prefix value. (0 to 128) MTU Enter the MTU value. (1280 to 1500) OK/Cancel See "Buttons common to every menu" on page 29. MAC address Displays the MAC address of the wireless card inserted in to the CF card slot. If a wireless card is not inserted, "00:00:00:00:00:00" will be displayed. IPv4 setting Configure the IPv4 network setting. 45 Configuring the Network - Network Menu