Sony SNC-RS44N User Guide - Page 7
Network Setting, Obtain an IP address automatically
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Preparation Tip The factory setting of the camera network is DHCP mode for both LAN and Wireless LAN. 7 Select a camera you want to assign an IP address from the list and click Network. The account settings screen is displayed. 8 Register the name and password of the administrator and click OK. The factory settings for both items are "admin." The Network Setting screen is displayed. 9 Set the IP address. To obtain the IP address automatically from a DHCP server: Select Obtain an IP address automatically. The IP address, Subnet mask and Default gateway are assigned automatically. Note When you select Obtain an IP address automatically, make sure that the DHCP server is operating on the network. To specify the IP address manually: Select Use the following IP address, and type the IP address, Subnet mask and Default gateway in the relevant boxes. 10 Set the DNS server address. To obtain the DNS server addresses automatically: Select Obtain DNS server address automatically. To specify the DNS server addresses manually: Select Use the following DNS server address, and type the Primary DNS server address and Secondary DNS server address in the relevant boxes. 11 Set the HTTP port No. Normally, select 80 for the HTTP port No. To use another port number, type a port number between 1024 and 65535 in the text box. Note When using a port number other than 80, check with the network administrator first. 12 Confirm that all items are correctly set, then click OK. If "Setting OK" is displayed, the IP address is correctly assigned. 13 When setting is finished, to access the camera directly, double-click the camera name in the list. 7 Assigning the IP Address to the Camera