Sony SNC-RS44N User Guide - Page 85
VMF setting items, Setting number, Inspection method, Inspection method settings
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Administrating the Camera • When you place the cursor on the vertex of the area, the cursor changes to n. Drag and move the vertex to adjust the detection size. Moving shadow exemption Set ON/OFF for the moving shadow exemption function of motion detection. Selecting ON will prevent the shadows of a moving object from being recognized as moving objects. Remove the check to disable the shadow removal function of motion detection. VMF setting items Up to three VMF settings (package number1 to 3) can be retained for each current camera position and preset position. You can select one of those settings for use. You can configure the inspection method and the size and speed of object to inspect individually for each package number. Setting number Select the setting number to set from 1, 2 or 3. The following VMF setting is saved for the individual setting number selected here. The set of the setting numbers selected here is valid for current VMF setting. Note package1, package2 and package3 of the VMF setting cannot be simultaneously enabled. Inspection method Specify the VMF inspection method. Select the inspection method from When any occur or When all occur in order. When any occur: An alarm will be set off when any one of the three conditions is met. When all occurs in order: An alarm will be set off when the three conditions are met in the sequence specified. If the conditions occur in an order different from the sequence specified, such as 1, 3 and then 2, there will be no alarm. Each inspection method can include up to 3 criteria. Select the inspection method from Pass, Presence, Appear, Disappear, Volume and None. Enable/Disable checkbox for inspection method Set enable/disable for individual inspection methods. Inspection method order switching button Clicking switches the order of inspection methods between the neighouring methods. e.g., If you click the button between 1 and 2, they will switch order. If you click the button between 2 and 3, they will switch order. Specifying the time for "When all occurs in order" Specify the reference interval in seconds between 1 and 2, or 2 and 3. For example, if "At least 3 seconds" is specified, the state of 2 being acknowledged two seconds after 1 has been acknowledged will not validate the acknowledgment of 2. Inspection method settings Settings for each inspection method can be edited here. The inspection line and active window are set to default values. Edit according to use. Tip The buttons displayed on the edit screen for inspection method is used in the same way as those for detection setting. See page 83. 85 Setting the Motion Detection/VMF Function - Motion detection Menu