Sony SNC-RS44N User Guide - Page 49
Dynamic IP address notification Tab - Notifying the IP Address, IPv6 QoS setting
UPC - 027242254855
View all Sony SNC-RS44N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Administrating the Camera Set Used when registering on the QoS table. QoS is set according to the following procedure: 1 Select No. from NO. and enter the necessary conditions for Network address, Subnet, Protocol and/or Port No.. 2 Enter values in the Protocol and DSCP fields. 3 Click Set and configure the QoS. Delete select No. to delete the setting and click Delete. QoS table Displays the list of registered QoS information. IPv6 QoS setting Select On to configure the QoS setting for IPv6. Rule Used to register, edit and delete QoS. No. Select the number to use when registering on the QoS table. When you select a registered number, the registered QoS information is displayed. Network address Enter the address to perform QoS. Prefix Enter the prefix. Port Enter the port number. Protocol Select the protocol. DSCP Enter the DSCP value. Set Used when registering on the QoS table. QoS is set according to the following procedure: 1 Select the number you want to register from No. and enter the necessary conditions for Network address, Prefix and Port. 2 Select Protocol and enter values in DSCP. 3 Click Set and configure the QoS. Delete select No. to delete the setting and click Delete. QoS table Displays the list of registered QoS information. Dynamic IP address notification Tab - Notifying the IP Address When Obtain an IP address automatically (DHCP) is selected in the Network tab or Wireless tab, you can send notification of completion of the network settings using the SMTP or HTTP protocol. e-Mail (SMTP) notification Select On to send an e-mail when the DHCP setting is completed. SMTP server name Type the name or IP address of the SMTP server for sending an e-mail, using up to 64 characters. SMTP port number Select the textbox and enter a port number from 25 to 65535. Use TLS To use the encryption function by TLS, set to On. STARTTLS To use the encryption function by STARTTLS, set to On. 49 Configuring the Network - Network Menu