Sony STRDG920 Operating Instructions - Page 10
Function, Saving the power in, standby mode., on/standby, Input buttons, Numeric, buttons, number 5 - active hdmi
UPC - 027242729896
View all Sony STRDG920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Name Function A AV ?/1 Press to turn on or off the (on/standby) audio/video components that the remote is programmed to operate. To turn the TV on or off, press TV (D) and then press AV ?/1. If you press ?/1 (B) at the same time, it will turn off the receiver and other components (SYSTEM STANDBY). Note The function of the AV ?/1 switch changes automatically each time you press the input buttons (E). B ?/1 Press to turn the receiver on or (on/standby) set it to the standby mode. To turn off all components, press ?/1 and AV ?/1 (A) at the same time (SYSTEM STANDBY). Saving the power in standby mode. When "Control for HDMI" is set to "OFF" (page 75). C AMP Press to enable the receiver operation (page 89). D TV Press to light up the button. It changes the remote key function to activate the buttons with yellow printing. It also activate the DISPLAY (U), OPTIONS TOOLS (K), HOME/MENU (L), RETURN/EXIT O (T), (J), and V/v/B/b (J) buttons to perform menu operations for Sony TVs only. E Input buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components (page 45). You can program the remote to control non-Sony components following the steps in "Programming the remote" on page 99. Name Numeric buttons (number 5*) ENT/MEM CLEAR Function Press SHIFT (X), then press numeric buttons to - preset/tune to preset stations. - select track numbers of the CD player, VCD player, LD player, DVD player, MD deck, DAT deck, or tape deck. Press 0/10 to select track number 10. - select channel numbers of the VCR, satellite tuner, Bluray disc player, PSX, DVD/ VHS COMBO, or DVD/ HDD COMBO. Press TV (D) and then press the numeric buttons to select the TV channels. Press SHIFT (X), then press ENT/MEM to - enter the value after selecting a channel, disc or track using the numeric buttons of the VCR, CD player, DVD player, LD player, MD deck, DAT deck, tape deck, satellite tuner, Blu-ray disc player, PSX, DVD/VHS COMBO, or DVD/HDD COMBO. - store a station during tuner operation. To enter the value of Sony TV, press TV (D) and then press ENT/MEM. Press SHIFT (X), then press CLEAR to - clear a mistake when you press the incorrect numeric button of the DVD player, Blu-ray disc player, PSX, satellite tuner, DVD/VHS COMBO, or DVD/HDD COMBO. - return to continuous playback, etc. of the satellite tuner or DVD player. 10US