Sony STRDG920 Operating Instructions - Page 95

When you select PHASE INFO., Select SAVE EXIT in step 2.

Get Sony STRDG920 - STR AV Receiver PDF manuals and user guides
UPC - 027242729896
View all Sony STRDG920 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Item Explanation LEVEL INFO. Displays the measurement result for speaker level. EXIT Exits the setting process without saving the measurement results. 3 Select "SAVE EXIT" in step 2. The measurement results are saved. 4 Press V/v repeatedly to select the Auto Calibration type, then press . Auto Calibration type FULL FLAT ENGINEER FRONT REF OFF Explanation Makes the measurement of frequency from each speaker flat. Sets the frequency characteristics to a set that matches that of the Sony listening room standard. Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. Set the Auto Calibration EQ to off. Tip The size of a speaker (LARGE/SMALL) is determined by the low frequency characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room. It is recommended that you follow the measurement results. However, you can change those settings in the Speaker settings menu. Save the measurement results first, then try to change the settings if you want. When you select "PHASE INFO." You can check the phase of each speaker (in phase/out of phase). Press V/v repeatedly to select a speaker, then press to return to step 1 in "To confirm/save Auto Calibration when GUI function is turned off." Display Explanation xxx* :IN The speaker is in phase. xxx* :OUT The speaker is out of phase. The "+" and "-" terminals of the speaker may be connected the other way around. However, depending on the speakers, "xxx :OUT" appears on the display even though the speakers are connected properly. This is because of the speakers' specifications. In this case, you can continue to use the receiver. xxx* :- - - No speakers are connected. * xxx represent a speaker channel. FL Front Left FR Front Right CNT Center SL Surround Left SR Surround Right SB Surround Back SBL Surround Back Left SBR Surround Back Right SW Subwoofer Tip Depending on the position of the subwoofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value. Other Operations 95US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
95
US
Other Operations
3
Select “SAVE EXIT” in step 2.
The measurement results are saved.
4
Press
V
/
v
repeatedly to select the Auto
Calibration type, then press
Tip
The size of a speaker (LARGE/SMALL) is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker settings menu. Save the measurement
results first, then try to change the settings if you
want.
When you select “PHASE INFO.”
You can check the phase of each speaker (in
phase/out of phase).
Press
V
/
v
repeatedly to select a speaker, then
press
to return to step 1 in “To confirm/save
Auto Calibration when GUI function is turned
off.”
*
xxx
represent a speaker channel.
FL
Front Left
FR
Front Right
CNT
Center
SL
Surround Left
SR
Surround Right
SB
Surround Back
SBL
Surround Back Left
SBR
Surround Back Right
SW
Subwoofer
Tip
Depending on the position of the subwoofer, the
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
Item
Explanation
LEVEL INFO.
Displays the measurement
result for speaker level.
EXIT
Exits the setting process
without saving the
measurement results.
Auto
Calibration
type
Explanation
FULL FLAT
Makes the measurement of
frequency from each speaker
flat.
ENGINEER
Sets the frequency
characteristics to a set that
matches that of the Sony
listening room standard.
FRONT REF
Adjusts the characteristics of
all the speakers to match the
characteristics of the front
speaker.
OFF
Set the Auto Calibration EQ to
off.
Display
Explanation
xxx
* :IN
The speaker is in phase.
xxx
* :OUT
The speaker is out of phase. The
“+” and “–” terminals of the
speaker may be connected the
other way around. However,
depending on the speakers,
“
xxx
:OUT” appears on the
display even though the speakers
are connected properly. This is
because of the speakers’
specifications. In this case, you
can continue to use the receiver.
xxx
* :– – –
No speakers are connected.