Sony STRDG920 Operating Instructions - Page 35
: Preparing the receiver and the remote, MODE and 2CH/A.DIRECT - av receiver
UPC - 027242729896
View all Sony STRDG920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Getting Started 6: Preparing the receiver and the remote Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. AC power cord (mains lead) SURROUND BACK R L SURROUND R L R FRONT B L FRONT A R L SPEAKERS CENTER To the wall outlet Notes • Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. • Connect the AC power cord (mains lead) firmly. Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. Be sure to use the buttons on the receiver for this operation. 1,2 ON/STANDBY POWER SPEAKERS (OFF/A/B/A+B) TONE MODE TONE TUNING MODE TUNING PHONES VIDEO 2 IN/PORTABLE AV IN VIDEO L AUDIO R AUTO CAL MIC MULTI CHANNEL DECODING DISPLAY INPUT MODE INPUT SELECTOR MEMORY/ ENTER DIMMER 2CH/ A.DIRECT A.F.D. MOVIE MUSIC MASTER VOLUME 2,3 2,3 1 Press POWER to turn off the receiver. 2 While holding down TONE MODE and 2CH/A.DIRECT, press POWER to turn on the receiver. 3 Release the TONE MODE and 2CH/A.DIRECT after a few seconds. After "CLEARING" appears on the display for a while, "CLEARED !" appears. All the settings you have changed or adjusted are reset to the initial settings. 35US