Sony STRDG920 Operating Instructions - Page 51
To select Enhanced Surround, To adjust the effect level, Types of 2CH mode
UPC - 027242729896
View all Sony STRDG920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Enjoying Surround Sound 6 Press V/v repeatedly to select the surround sound you want. To select Enhanced Surround Mode 1 Select "Enhanced Sur Mode" in step 5 above. 2 Press V/v repeatedly to select the enhanced surround sound you want. 3 Press . Note The selected Enhanced Surround Mode can only be applied if you have selected "Enhanced Sur" as a sound field in "Sound Field Setup" parameter. To adjust the effect level 1 After you have selected the surround sound in step 6, press or b. 2 Press V/v repeatedly to adjust the effect level, then press /B/b. Higher settings apply more surround effect. You can adjust the effect level in 4 steps (50%, 80%, 100%, 150%). Note You may not able to adjust the effect level for some sound field. Types of 2CH mode x 2ch Stereo The receiver outputs the sound from the front left/right speakers only. There is no sound from the subwoofer. Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channel (except LFE signals). Note No sound is output from the subwoofer in the 2ch Stereo mode. To listen to 2 channel stereo sources using the front left/right speakers and a subwoofer, select "A.F.D. Auto". This receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signal, which is a low-pass sound effect output from a subwoofer to a 2 channel signal. x Analog Direct You can switch the audio of the selected input to 2 channel analog input. This function enables you to enjoy high quality analog sources. When using this function, only the volume and front speaker level can be adjusted. 51US