Sony STRDG920 Operating Instructions - Page 86
D.range, Sp A+b, Sleep, Tuner, Indicators, A.direct, Pliix, Neo:6, Dts-hd, Dts-hd Hi, Analog, Dmport
UPC - 027242729896
View all Sony STRDG920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Name I D.RANGE J CAT K SP A/ SP B/ SP A+B L SLEEP M Tuner indicators N A.DIRECT O MEM P XM Q ; PL/ ; PLII/ ; PLIIx Function Lights up when dynamic range compression is activated. Lights up when category mode is selected during the XM Radio operation. Lights up according to the speaker system used (page 39). However, these indicators do not light up if the speaker output is turned off or if headphones are connected. Lights up when the Sleep Timer is activated. Lights up when using the receiver to tune in radio stations, etc. Lights up when ANALOG DIRECT is selected. Lights up when a memory function, such as Preset Memory, etc., is activated. Lights up when XM Mini-Tuner and Home Dock are connected and "XM" is selected. "; PL" lights up when the receiver applies Dolby Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "; PLII" lights up when the Dolby Pro Logic II decoder is activated. "; PL IIx" lights up when the Dolby Pro Logic IIx decoder is activated. However, these indicators do not light up if both the center and surround speakers are not connected and you select a sound field using the A.F.D. button. Note Dolby Pro Logic IIx decoding does not function for signals with a sampling frequency of more than 48 kHz. Name R NEO:6 S EQ T DTS-HD MSTR/ DTS-HD HI RES U LPCM V ANALOG W DMPORT X HDMI Function Lights up when DTS Neo:6 Cinema/Music decoder is activated. Lights up when the equalizer is activated. "DTS-HD MSTR" lights up when the receiver is decoding DTS-HD Master Audio signals. "DTS-HD HI RES" lights up when the receiver is decoding DTS-HD Hi-Resolution signals. Lights up when Linear PCM signals is received. Lights up when - INPUT MODE is set to "AUTO" and no digital signal is being input through the COAXIAL, OPTICAL or HDMI jacks. - INPUT MODE is set to "ANALOG". - the "Analog Direct" is being used. Lights up when DIGITAL MEDIA PORT adapter is connected and "DMPORT" is selected. Lights up when the receiver recognizes a component connected via a HDMI IN jack. 86US