Sony STRDG920 Operating Instructions - Page 42
Confirming/saving the, measurement results, the Auto Calibration Type, then
UPC - 027242729896
View all Sony STRDG920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Confirming/saving the measurement results 1 Confirm the measurement result. When the measurement ends, a beep sounds. * When the speaker(s) is (are) out of the phase, "OUT" is displayed on the TV screen. The "+" and "-" terminals of the speaker may be connected the other way around. However, depending on the speakers, "OUT" appears on the TV screen even though the speakers are connected properly. This is because of the speakers' specifications. In this case, you can continue to use the receiver. 3 Select "Save" in step 2 to save the measurement result. 4 Press V/v repeatedly to select the Auto Calibration Type, then press . 2 Press V/v to select the item you want, then press . Item Retry Save Warning Phase* Distance Level Exit Explanation Performs the Auto Calibration again. Saves the measurement results and exits the setting process. Displays warning concerning the measurement results. See "Message list after Auto Calibration measurement" (page 43). Displays the phase of each speaker (in phase/out of phase). Displays the measurement result for speaker distance. Displays the measurement result for speaker level. Exits the setting process without saving the measurement results. Parameter Full Flat Engineer Front Reference Off Explanation Makes the measurement of frequency from each speaker flat. Sets the frequency characteristics to a set that matches that of the Sony listening room standard. Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. Sets the Auto Calibration EQ to off. 42US