Sony STRDG920 Operating Instructions - Page 59

5 Press V/v repeatedly to select the speaker pattern you want. 4 Press V/v repeatedly to select "Test Tone", then press or b. Advanced Speakers Setting Up Making settings with the Test Tone menu CLEAR/>10 XM 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE DISPLAY GUI MODE 1 2-6 O RETURN/ EXIT HOME MENU OPTIONS TOOLS MENU 1 Press GUI MODE. "GUI MODE" appears on the display and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 2 Press V/v repeatedly to select "Settings", then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select "Speaker", then press or b. You can select the test tone type. 5 Press V/v repeatedly to select the speaker you want to adjust, then press . The test tone is output from each speaker in sequence. 6 Adjust the parameter using V/v, then press . Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value is shown on the TV screen during adjustment. When a test tone is not output from the speakers • The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. • The speaker cords may have the short-circuit problem. When a test tone is output from a different speaker than the speaker displayed on the TV screen The speaker pattern to the connected speaker is not set up correctly. Make sure the speaker connection and the speaker pattern match. 59US