Sony STRDG920 Operating Instructions - Page 96
To select Enhanced Surround, Tuning radio stations, Selecting a frequency directly, Direct Tuning
UPC - 027242729896
View all Sony STRDG920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Selecting a sound field type For details on each sound field type, see "Enjoying a pre-programmed sound field" (page 50). Press 2CH/A.DIRECT, A.F.D., MOVIE, or MUSIC repeatedly. The selected sound field type appears on the display. To select Enhanced Surround Mode 1 Press AMP. 2 Press MENU. 3 Press V/v repeatedly to select "", then press or b. 4 Press V/v repeatedly to select "E.SUR MODE", then press or b. 5 Press V/v repeatedly to select the enhanced surround sound you want, then press . Note The selected Enhanced Surround Mode can only be applied if you have selected "E.SURROUND" by pressing A.F.D. repeatedly. Listening to the sound without any adjustment (ANALOG DIRECT) Press 2CH/A.DIRECT repeatedly to select "A. DIRECT". Listening to the FM/AM radio For details on the tuner function, see "Tuner Operations" (page 62). Tuning radio stations 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING -. Press TUNING + to scan from low to high frequencies, press TUNING - to scan from high to low frequencies. The receiver stops scanning whenever a station is received. You can also press TUNING MODE on the receiver to select "AUTO", and then turn TUNING +/- to select stations. Selecting a frequency directly (Direct Tuning) 1 After selecting the FM or AM band, press D.TUNING. 2 Press SHIFT, then press numeric buttons to enter the frequency. 3 Press . Presetting radio stations 1 Tune in the station that you want to preset. For details on the operation, refer to "Tuning radio stations". 2 Press SHIFT, then press ENT/MEM. You can also use MEMORY/ENTER on the receiver. "MEM" lights up for a few seconds. Perform steps 3 and 4 before "MEM" disappears. 96US