TP-Link TL-WR1042ND User Guide - Page 23
TL-WR1042ND, IP Address, Subnet Mask, Default Gateway, Primary, Secondary DNS
View all TP-Link TL-WR1042ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
TL-WR1042ND 300Mbps Wireless N Gigabit Router Figure 3-10 Find MAC Address ¾ If the connection type detected is Static IP, the next screen will appear as shown in Figure 3-11. Figure 3-11 Quick Setup - Static IP ¾ IP Address - This is the WAN IP address seen by external users on the Internet (including your ISP). Enter the IP address into the field. ¾ Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0. ¾ Default Gateway - Enter the gateway IP address into the box if required. ¾ Primary DNS - Enter the DNS Server IP address into the box if required. ¾ Secondary DNS - If your ISP provides another DNS server, enter it into this field. 5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-12. -14-