TP-Link TL-WR1042ND User Guide - Page 32
User Name/Password, PPPoE/Russia PPPoE
View all TP-Link TL-WR1042ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
TL-WR1042ND 300Mbps Wireless N Gigabit Router ¾ Default Gateway - (Optional) Enter the gateway IP address provided by your ISP in dotted-decimal notation. ¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU Size unless required by your ISP. ¾ Primary/Secondary DNS - (Optional) Enter one or two DNS addresses in dotted-decimal notation provided by your ISP. 3. If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. And you should enter the following parameters (Figure 4-8): Figure 4-8 WAN - PPPoE ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Confirm Password - Re-enter the Password provided by your ISP to ensure the Password you entered is correct. ¾ Secondary Connection - It's available only for PPPoE Connection. If your ISP provides an extra Connection type such as Dynamic/Static IP to connect to a local area network, then you can check the radio button of Dynamic/Static IP to activate this secondary connection. • Disabled - The Secondary Connection is disabled by default, so there is PPPoE connection only. This is recommended. -23-