TP-Link TL-WR1042ND User Guide - Page 92
TL-WR1042ND, Description, Egress bandwidth, Enable, Modify, Delete
View all TP-Link TL-WR1042ND manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
TL-WR1042ND 300Mbps Wireless N Gigabit Router Figure 4-82 Bandwidth Control Rules List ¾ Description - This is the information about the rules such as address range. ¾ Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0. ¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0. ¾ Enable - This displays the status of the rule. ¾ Modify - Click Modify to edit the rule. Click Delete to delete the rule. To add/modify a Bandwidth Control rule, follow the steps below. 1. Click Add New... shown in Figure 4-82, you will see a new screen shown in Figure 4-83. 2. Enter the information like the screen shown below. Figure 4-83 Bandwidth Control Rule Settings 3. Click the Save button. -83-