TP-Link TL-WR740N User Guide

TP-Link TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in Manual

Get TP-Link TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in manuals and user guides
UPC - 813120016543
Free TP-Link TL-WR740N manuals!

TP-Link TL-WR740N manual table of contents:

  • TP-Link TL-WR740N | User Guide - Page 1
    TL-WR740N TL-WR741ND 150Mbps Wireless N Router Rev: 2.0.0 1910010391
  • TP-Link TL-WR740N | User Guide - Page 2
    ... such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright ©...-LINK TECHNOLOGIES CO., LTD. All rights reserved. http://www.tp-link.com is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or...
  • TP-Link TL-WR740N | User Guide - Page 3
    ... Reason/remark General authorization required for outdoor use and public service Military Radiolocation use. Refarming of the 2.4 GHz band has been ..., general authorization is required General authorization required for network and service supply(not for spectrum) This subsection does not apply for ...
  • TP-Link TL-WR740N | User Guide - Page 4
    ...DECLARATION OF CONFORMITY For the following equipment: Product Description: 150Mbps Wireless N Router Model No.: TL-WR740N/TL-WR741ND Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical...
  • TP-Link TL-WR740N | User Guide - Page 5
    .../IP Configuration ...8 Quick Installation Guide ...10 Chapter 4. Configuring the Router ...16 4.1 4.2 4.3 4.4 4.5 Login ...16 Status ...16 Quick Setup...17 QSS...18 Network ... 4.6 LAN...24 WAN...25 MAC Clone ...35 Wireless ...36 4.6.1 4.6.2 4.6.3 4.6.4 Wireless Settings...36 Wireless ...
  • TP-Link TL-WR740N | User Guide - Page 6
    4.6.5 4.7 Wireless Statistics...46 DHCP ...47 4.7.1 4.7.2 4.7.3 DHCP Settings...47 DHCP Clients List ...48 Address Reservation ...49 ... 4.9.4 Basic Security...56 Advanced Security...57 Local Management ...58 Remote Management ...59 4.10 Parental Control ...60 4.11 Access Control ...63 4.11.1 Rule ...
  • TP-Link TL-WR740N | User Guide - Page 7
    ....com DDNS ...80 4.16 System Tools...81 4.16.1 Time Settings...82 4.16.2 Diagnostic ...83 4.16.3 Firmware Upgrade...84 4.16.4 Factory Defaults...85 4.16.5 Backup & Restore...86 4.16.6 Reboot ...87 4.16.7 Password ...87 4.16.8 System log ...88 4.16.9 ...
  • TP-Link TL-WR740N | User Guide - Page 8
    ...-WR741ND 150Mbps Wireless N Router DC Power Adapter for TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Quick Installation Guide Resource CD for TL-WR740N/TL-WR741ND 150Mbps Wireless N Router, including: • • This Guide Other Helpful Information Note: Make sure ...
  • TP-Link TL-WR740N | User Guide - Page 9
    .../TL-WR741ND 150Mbps Wireless N Router. 1.1 Overview of the Router The TL-WR740N/TL-WR741ND 150Mbps ... performance. Incredible Speed The TL-WR740N/TL-WR741ND 150Mbps Wireless N Router provides up to ...as advanced Firewall protections, the TL-WR740N/TL-WR741ND 150Mbps Wireless N Router provides complete ...
  • TP-Link TL-WR740N | User Guide - Page 10
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 1.2 Conventions The Router or TL-WR740N/TL-WR741ND mentioned in this guide stands for TL-WR740N/TL-WR741ND 150Mbps Wireless N Router without any explanation. Note: The two devices of TL-WR740N and TL-WR741ND are sharing this User ...
  • TP-Link TL-WR740N | User Guide - Page 11
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 Front Panel sketch The Router's LEDs are located on the front panel (View from left to right). Name (Power) (System) (WLAN) Status Off On Flashing On /Off Off Flashing Off (WAN), (...
  • TP-Link TL-WR740N | User Guide - Page 12
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are... you will connect the power adapter. Please use the power adapter provided with this TL-WR740N/TL-WR741ND 150Mbps Wireless N Router. ON/OFF: The switch for the power. 4,3,2,1 (...
  • TP-Link TL-WR740N | User Guide - Page 13
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Chapter 2. Connecting the Router 2.1 System Requirements Broadband Internet Access Service (DSL/Cable/...each Switch/Hub in your LAN to the LAN Ports on the Router, shown in Figure 2-1. (If you have the wireless NIC and want to use the wireless ...
  • TP-Link TL-WR740N | User Guide - Page 14
    TL-WR740N/TL-WR741ND electrical outlet. The Router will start to work automatically. 7. Power on your PC and Cable/DSL Modem. 150Mbps Wireless N Router Figure 2-1 Hardware Installation of the TL-WR741ND 150Mbps Wireless N Router -7-
  • TP-Link TL-WR740N | User Guide - Page 15
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of your TL-WR741ND 150Mbps Wireless N Router using Quick Setup Wizard within minutes. 3.1 TCP/IP Configuration The default IP address of the ...
  • TP-Link TL-WR740N | User Guide - Page 16
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 3-1 Success result of Ping command If the result displayed is similar to the Figure ... your PC and the Router correct? Note: The 1/2/3/4 LEDs of LAN ports which you link to on the Router and LEDs on your PC's adapter should be lit. -9-
  • TP-Link TL-WR740N | User Guide - Page 17
    TL-WR740N/TL-WR741ND 2. Is the TCP/IP configuration for your PC correct? Note: 150Mbps Wireless N Router If ....1.254. 3.2 Quick Installation Guide With a Web-based utility, it is easy to configure and manage the TL-WR741ND 150Mbps Wireless N Router. The Web-based utility can be used on any Windows,...
  • TP-Link TL-WR740N | User Guide - Page 18
    TL-WR740N/TL-WR741ND Router. 150Mbps Wireless N Router Figure 3-5 Quick Setup 3. Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6. Figure 3-6 WAN Connection Type The Router provides Auto-Detect function and supports three popular ways PPPoE, Dynamic IP ...
  • TP-Link TL-WR740N | User Guide - Page 19
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 3-7 Quick Setup - PPPoE User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP. 2) If the connection type detected...
  • TP-Link TL-WR740N | User Guide - Page 20
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 3-9 Quick Setup - Wireless Wireless Radio - Enable or disable the ... you notice interference problems with another nearby access point. Mode - This field determines the wireless mode which the Router works on. Channel Width - Select ...
  • TP-Link TL-WR740N | User Guide - Page 21
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Max Tx Rate - You can limit the maximum transmission rate of the Router through this field....the Finish page as shown in Figure 3-11. Click the Reboot button to make your wireless configuration to take effect and finish the Quick Setup. - 14 -
  • TP-Link TL-WR740N | User Guide - Page 22
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 3-11 Quick Setup - Finish - 15 -
  • TP-Link TL-WR740N | User Guide - Page 23
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Chapter 4. Configuring the Router This chapter will show each Web page's key functions and the configuration way. 4.1 Login After your successful login, you will see the fifteen main menus on the left of the Web-based utility. On the right, ...
  • TP-Link TL-WR740N | User Guide - Page 24
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-2 Router Status 4.3 Quick Setup Please refer to Section 3.2: "Quick Installation Guide." - 17 -
  • TP-Link TL-WR740N | User Guide - Page 25
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 4.4 QSS This section will guide you to add a new wireless device to an existing network quickly by QSS (Quick Secure Setup) function. a). Choose menu "QSS", you will see the next screen (shown in Figure 4-3 ). Figure 4-3 QSS QSS Status...
  • TP-Link TL-WR740N | User Guide - Page 26
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Step 2: Press and hold the QSS button of the adapter directly for 2 or 3 seconds. Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration. The QSS Configuration Screen of Wireless Adapter ...
  • TP-Link TL-WR740N | User Guide - Page 27
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router The QSS Configuration Screen of Wireless Adapter Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration. The QSS Configuration Screen of Wireless Adapter Method Three: Step 1: Keep the default ...
  • TP-Link TL-WR740N | User Guide - Page 28
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-4 Step 2: Step 3: Add A New Device Choose "Press the button of the new device in two minutes" and click Connect. For the configuration of the wireless adapter, please choose "Push the button on my access point" in the ...
  • TP-Link TL-WR740N | User Guide - Page 29
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router The QSS Configuration Screen of Wireless Adapter II. By PIN If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with the following two methods. Method One: Enter the PIN into my Router ...
  • TP-Link TL-WR740N | User Guide - Page 30
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router The QSS Configuration Screen of Wireless Adapter Note: In this example, the default PIN code of this adapter is 16952898 as the above figure shown. Method Two: Enter the PIN from my Router Step 1: Get the Current PIN code of the Router in ...
  • TP-Link TL-WR740N | User Guide - Page 31
    TL-WR740N/TL-WR741ND Note: 150Mbps Wireless N Router The default PIN code of the Router can be found in its label or the QSS configuration screen as Figure 4-3. c). You will see the following screen when the new device successfully connected to the network. Note: 1. The QSS LED on the ...
  • TP-Link TL-WR740N | User Guide - Page 32
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-6 LAN MAC Address - The physical address of the Router, as seen from the LAN. The value can't be changed. IP Address - Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.168.1.1). Subnet...
  • TP-Link TL-WR740N | User Guide - Page 33
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-7 WAN - Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP. Click the ...
  • TP-Link TL-WR740N | User Guide - Page 34
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router applications. If you cannot get the IP Address normally, you can choose this option. (It is rarely required.) Click the Save button to save your settings. 2. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS ...
  • TP-Link TL-WR740N | User Guide - Page 35
    TL-WR740N/TL-WR741ND 3. 150Mbps Wireless N Router If your ISP provides a PPPoE connection, select PPPoE/Russia PPPoE option. And you should enter the following parameters (Figure 4-9): Figure 4-9 WAN - PPPoE User Name/Password - Enter the User Name and Password provided by your ISP. ...
  • TP-Link TL-WR740N | User Guide - Page 36
    TL-WR740N/TL-WR741ND to have elapsed before your Internet access disconnects. 150Mbps Wireless N Router Connect Automatically - The connection can be re-established automatically when it was down. Time-based Connecting - The connection will only be established in the period from the start...
  • TP-Link TL-WR740N | User Guide - Page 37
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-10 PPPoE Advanced Settings MTU Size - The default MTU size is "1480" bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP. Service Name/AC Name - The service name ...
  • TP-Link TL-WR740N | User Guide - Page 38
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-11 User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Auth Server - Enter the authenticating server IP address or host name. Auth Domain - Type in the domain suffix server ...
  • TP-Link TL-WR740N | User Guide - Page 39
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Connect Automatically - The connection can be re-established automatically when it was down. Connect Manually - You can click the Connect/Disconnect button to connect/disconnect immediately. This mode also supports the Max Idle Time function ...
  • TP-Link TL-WR740N | User Guide - Page 40
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Dynamic IP/ Static IP - Choose either as you are given by your ISP. Click the Connect button to connect immediately. Click the ...
  • TP-Link TL-WR740N | User Guide - Page 41
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-13 PPTP Settings User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP's IP address or the...
  • TP-Link TL-WR740N | User Guide - Page 42
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, check the radio button. If you want your Internet connection to remain active at all times, enter “0ମ.
  • TP-Link TL-WR740N | User Guide - Page 43
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-14 MAC Address Clone Some ISPs require that you register the MAC Address of your adapter. Changes are rarely needed here. WAN MAC Address - This field displays the current MAC address of the WAN port. If your ISP requires you to ...
  • TP-Link TL-WR740N | User Guide - Page 44
    TL-WR740N/TL-WR741ND wireless network on this page. 150Mbps Wireless N Router Figure 4-16 Wireless Settings SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. Considering your wireless ...
  • TP-Link TL-WR740N | User Guide - Page 45
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Channel - This field determines which operating frequency will be used. The default channel is set to 6. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. Mode - ...
  • TP-Link TL-WR740N | User Guide - Page 46
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a ... the security settings of your wireless network. There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy), WPA (Wi-Fi ...
  • TP-Link TL-WR740N | User Guide - Page 47
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-17 Wireless Security Disable Security - If you do not want to use wireless security, check this radio button. But it's strongly recommended to choose one of the following modes to enable security. WEP - It is based on the IEEE 802...
  • TP-Link TL-WR740N | User Guide - Page 48
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router • Type - you can choose the type for the WEP security on the pull-down list. The default setting is Automatic, which can select Shared Key or Open System authentication type automatically based on the wireless station's capability and ...
  • TP-Link TL-WR740N | User Guide - Page 49
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router • Radius Server IP - Enter the IP address of the Radius server. • Radius Port - Enter the port number of the Radius server. • Radius Password - Enter the password for the Radius server. • Group Key Update Period - Specify the group ...
  • TP-Link TL-WR740N | User Guide - Page 50
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-21 Wireless MAC Filtering To filter wireless users by MAC Address, click Enable. The default setting is Disable. MAC Address - The wireless station's MAC address that you want to filter. Status - The status of this entry, either ...
  • TP-Link TL-WR740N | User Guide - Page 51
    TL-WR740N/TL-WR741ND 3. 4. 150Mbps Wireless N Router Select Enabled or Disabled for this entry on the Status pull-down list. Click the Save ..., but all the other wireless stations cannot access the Router, you can configure the Wireless MAC Address Filtering list by following these steps: ...
  • TP-Link TL-WR740N | User Guide - Page 52
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 4.6.4 Wireless Advanced Choose menu "Wireless → Wireless Advanced", you can configure the advanced settings of your wireless network. Figure 4-23 Wireless Advanced Transmit Power - Here you can specify the transmit power of Router. You...
  • TP-Link TL-WR740N | User Guide - Page 53
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval. Enable WMM - WMM function can guarantee the packets with high-priority messages being transmitted ...
  • TP-Link TL-WR740N | User Guide - Page 54
    TL-WR740N/TL-WR741ND Note: This page will be refreshed automatically every 5 seconds. 150Mbps Wireless N Router 4.7 DHCP Figure 4-25 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 4-25), DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, ...
  • TP-Link TL-WR740N | User Guide - Page 55
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.1.199 is the default end address. Address Lease Time - The Address Lease Time is the amount of time a network user will be allowed ...
  • TP-Link TL-WR740N | User Guide - Page 56
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Refresh button. 4.7.3 Address Reservation Choose menu "DHCP → Address Reservation", you can view and add a ...
  • TP-Link TL-WR740N | User Guide - Page 57
    TL-WR740N/TL-WR741ND To modify or delete an existing entry: 1. 150Mbps Wireless N Router Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete. 2. 3. Modify the information. Click the Save button. Click the Enable/Disabled All button to ...
  • TP-Link TL-WR740N | User Guide - Page 58
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Service Port - The numbers of External Ports. You can type a service port or a range of service ports (in XXX - YYY format, XXX is the start port number, YYY is the end port number). IP Address - The IP Address of the PC providing the ...
  • TP-Link TL-WR740N | User Guide - Page 59
    TL-WR740N/TL-WR741ND 3. Click the Save button. 150Mbps Wireless N Router Click the Enable/Disabled All button to make all entries enabled/disabled. Click the Delete All button to delete all entries. Click the Next button to go to the next page and click the Previous button to return the ...
  • TP-Link TL-WR740N | User Guide - Page 60
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Incoming Ports Range - The port or port range used by the remote system when it responds to the outgoing request. A response using one of these ports will be forwarded to the PC that triggered this rule. You can input at most 5 groups of ...
  • TP-Link TL-WR740N | User Guide - Page 61
    TL-WR740N/TL-WR741ND 3. Click the Save button. 150Mbps Wireless N Router Click the Enable All button to make all entries enabled Click the Disabled All button to make all entries disabled. Click the Delete All button to delete all entries Note: 1. 2. 3. When the trigger connection is ...
  • TP-Link TL-WR740N | User Guide - Page 62
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-36 UPnP Current UPnP Status - UPnP can be enabled or disabled by clicking the Enable or Disable button. Current UPnP Settings List - This table displays the current UPnP information. App Description - The description provided by ...
  • TP-Link TL-WR740N | User Guide - Page 63
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 4.9.1 Basic Security Choose menu "Security → Basic Security", you can configure the basic security in the screen as shown in Figure 4-38. Figure 4-38 Basic Security Firewall - A firewall protects your network from the outside world. ...
  • TP-Link TL-WR740N | User Guide - Page 64
    TL-WR740N/TL-WR741ND pass through the Router, keep the default, Enabled. 150Mbps Wireless N Router IPSec Passthrough - Internet Protocol Security (IPSec) is a suite of protocols for ensuring private, secure communications over Internet Protocol (IP) networks, through the use of cryptographic ...
  • TP-Link TL-WR740N | User Guide - Page 65
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Packets Statistics Interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds from the drop-down list. The Packets Statistics Interval value indicates the time section of the packets statistics. The result of the ...
  • TP-Link TL-WR740N | User Guide - Page 66
    TL-WR740N/TL-WR741ND from accessing the Router. 150Mbps Wireless N Router Figure 4-40 Local Management By default, the radio button "All the PCs on the LAN are allowed to access the Router's Web-Based Utility" is checked. If you want to allow PCs with specific MAC Addresses to access...
  • TP-Link TL-WR740N | User Guide - Page 67
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-41 Remote Management Web Management Port - Web browser access normally uses the standard HTTP service port 80. This Router's default remote management web port number is 80. For greater security, you can change the remote management...
  • TP-Link TL-WR740N | User Guide - Page 68
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-42 Parental Control Settings Parental Control - Check Enable if you want this function to take effect, otherwise check Disable. MAC Address of Parental PC - In this field, enter the MAC address of the controlling PC, or you can make...
  • TP-Link TL-WR740N | User Guide - Page 69
    TL-WR740N/TL-WR741ND 7. Click the Save button. 150Mbps Wireless N Router Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the list. Click the Delete All button to delete all the entries in the table. Click the Next ...
  • TP-Link TL-WR740N | User Guide - Page 70
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 3. Click "Parental Control" menu on the left to go back to the Add or Modify Parental Control Entry page: Click Add New...button. Enter 00-11-22-33-44-AA in the MAC Address of Child PC field. Enter "Allow Google" in the Website ...
  • TP-Link TL-WR740N | User Guide - Page 71
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-46 Access Control Rule Management Enable Internet Access Control - Select the check box to enable the Internet Access Control function, so the Default Filter Policy can take effect. Rule Name - Here displays the name of the rule and...
  • TP-Link TL-WR740N | User Guide - Page 72
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 5. Select a schedule from the Schedule drop-down list or choose "Click Here To Add New Schedule". 6. In the Action field, select Deny or Allow. 7. In the Status field, select Enabled or Disabled to enable or disable your entry. 8. Click ...
  • TP-Link TL-WR740N | User Guide - Page 73
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 3. Click “Access Control → Schedule” in the left to enter the Schedule Settings page. Add a ... and choose "Deny the packets not specified by any access control policy to pass through the Router". 5. Click Add New...button to add a new ...
  • TP-Link TL-WR740N | User Guide - Page 74
    TL-WR740N/TL-WR741ND To add a new entry, please follow the steps below. 1. 2. Click the Add New... button. In the Mode field, select IP Address or MAC Address. 150Mbps Wireless N Router If you select IP Address, the screen shown is Figure 4-49. 1) In Host Description field, create a ...
  • TP-Link TL-WR740N | User Guide - Page 75
    TL-WR740N/TL-WR741ND 3. 4. 5. 150Mbps Wireless N Router In Host Description field, create a unique description for the host (e.g. Host_1). In MAC... drop-down list don't have the service you want, specify the Target Port manually. 4) In Protocol field, select TCP, UDP, ICMP or ALL. If you ...
  • TP-Link TL-WR740N | User Guide - Page 76
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 1) In Target Description field, create a unique description for the target (e.g. Target_1). 2) In Domain Name field, enter the domain name in the blank. You can enter 4 domain names. 3. Click the Save button. Click the Delete All button to ...
  • TP-Link TL-WR740N | User Guide - Page 77
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 1. Click Add New... button in Figure 4-51 to enter the Add or Modify an Access Target Entry page. 2. In Mode field, select Domain Name from the drop-down list. 3. In Target Description field, create a unique description for the target (e.g. ...
  • TP-Link TL-WR740N | User Guide - Page 78
    TL-WR740N/TL-WR741ND 5. Click Save to complete the settings. Click the Delete All button to delete all the entries in the table. 150Mbps Wireless N Router Click the Next button to go to the next page, or click the Previous button return to the previous page. Figure 4-55 Advanced Schedule...
  • TP-Link TL-WR740N | User Guide - Page 79
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 4.12 Advance Routing Figure 4-56 Advanced Routing Menu There are two submenus under the Network menu (shown in Figure 4-56): Static Routing List and System Routing Table. Click any of them, and you will be able to configure the ...
  • TP-Link TL-WR740N | User Guide - Page 80
    TL-WR740N/TL-WR741ND 2. Enter the following data. 150Mbps Wireless N Router Destination IP Address - The Destination IP Address is the address of the network or host that you want to assign to a static route. Subnet Mask - The Subnet Mask determines which portion of an IP Address is the ...
  • TP-Link TL-WR740N | User Guide - Page 81
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Subnet Mask - The Subnet Mask determines which portion of an IP address is the network portion, and which portion is the host portion. Gateway - This is the IP address of the gateway device that allows for contact between the Router and the ...
  • TP-Link TL-WR740N | User Guide - Page 82
    TL-WR740N/TL-WR741ND Control rules in the screen below. 150Mbps Wireless N Router Figure 4-61 Bandwidth Control Rules List Description - This is the information about the rules such as address range. Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN ...
  • TP-Link TL-WR740N | User Guide - Page 83
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 4.14 IP& MAC Bing Setting Figure 4-63 the IP & MAC Binding menu There are two submenus under the IP &MAC Binding menu (shown in Figure 4-63): Binding Setting and ARP List. Click any of them, and you will be able to scan or configure the ...
  • TP-Link TL-WR740N | User Guide - Page 84
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-65 IP & MAC Binding Settings To add IP & MAC Binding entries, follow the steps below. 1. 2. 3. 4. Click the Add New...button as shown in Figure 4-64. Enter the MAC Address and IP Address. Select the Bind checkbox. Click the Save ...
  • TP-Link TL-WR740N | User Guide - Page 85
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 4.14.2 ARP List To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could configure the items on the ARP list also. This page displays the ARP ...
  • TP-Link TL-WR740N | User Guide - Page 86
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router of a website, FTP server, or e-mail server with a fixed domain name (named by yourself) and a dynamic IP address, and then your friends can connect to your server by entering your domain name no matter what your IP address is. Before using ...
  • TP-Link TL-WR740N | User Guide - Page 87
    TL-WR740N/TL-WR741ND Click Logout to log out of the DDNS service. 150Mbps Wireless N Router 4.15.2 Dyndns.org DDNS If the dynamic DNS Service Provider you select is www.dyndns.org, the page will appear as shown in Figure 4-69. Figure 4-69 Dyndns.org DDNS Settings To set up for DDNS, follow ...
  • TP-Link TL-WR740N | User Guide - Page 88
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-70 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. 2. 3. 4. Type the User Name for your DDNS account. Type the Password for your DDNS account. Type the Domain Name you received from dynamic DNS service ...
  • TP-Link TL-WR740N | User Guide - Page 89
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Choose menu "System Tools", you can see the submenus under the main menu: Time Settings, Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Reboot, Password, System Log and Statistics. Click any of them, and you will be ...
  • TP-Link TL-WR740N | User Guide - Page 90
    TL-WR740N/TL-WR741ND Note: 150Mbps Wireless N Router 1. This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log in to the Router successfully, otherwise, these functions will not take effect. 2. The time will be lost if the ...
  • TP-Link TL-WR740N | User Guide - Page 91
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router is not, you might have a name resolution problem. In this case, ensure that ... destination IP address (such as 202.108.22.5) or Domain name (such as http://www.tp-link.com). Pings Count - The number of Ping packets for a Ping connection. Ping ...
  • TP-Link TL-WR740N | User Guide - Page 92
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-75 Firmware Upgrade Firmware Version - This displays the current firmware ... Router's firmware, follow these instructions below: 1. Download a more recent firmware upgrade file from the TP-LINK website (http://www.tp-link.com). 2. ...
  • TP-Link TL-WR740N | User Guide - Page 93
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-76 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. The default User Name: admin The default Password: admin The default IP Address: 192.168.1.1 The default Subnet ...
  • TP-Link TL-WR740N | User Guide - Page 94
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router 4.16.6 Reboot Choose menu "System Tools → Reboot", you can ...). Change the DHCP Settings. Change the Wireless configurations. Change the Web Management Port. Upgrade the firmware of the Router (system will reboot automatically). Restore ...
  • TP-Link TL-WR740N | User Guide - Page 95
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router of the Router, because all users who try to access the Router's Web-based utility or Quick Setup will be prompted for the Router's default user name and password. Note: The new user name and password must not exceed 14 characters in length ...
  • TP-Link TL-WR740N | User Guide - Page 96
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 4-81 Mail Account Settings From - Your mail box address. The Router would connect it to send logs. To - Recipient's address. The destination mailbox where the logs would be received. SMTP Server - Your smtp server. It corresponds ...
  • TP-Link TL-WR740N | User Guide - Page 97
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Log Level - By selecting the log level, only logs of this level will be shown. Refresh - Refresh the page to show the latest log list. Save Log - Click to save all the logs in a txt file. Mail Log - Click to send an email of current logs ...
  • TP-Link TL-WR740N | User Guide - Page 98
    TL-WR740N/TL-WR741ND Click Delete All to delete all entries in the table. Statistics Table: IP Addess/MAC Address Packets Total Bytes Packets 150Mbps Wireless N Router The IP Address and MAC address are displayed with related statistics The number of packets received and transmitted by ...
  • TP-Link TL-WR740N | User Guide - Page 99
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Appendix A: FAQ 1. How do I configure the Router to access the Internet by ADSL users? 1) 2) First, configure the ADSL Modem configured in RFC1483 bridge model. Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. ...
  • TP-Link TL-WR740N | User Guide - Page 100
    TL-WR740N/TL-WR741ND 2. 150Mbps Wireless N Router How do I configure the Router to access the Internet by Ethernet users? 1) Log in to ... installation. If your ISP requires MAC register, log in to the Router and click the "Network" menu link on the left of your browser, and then click "MAC ...
  • TP-Link TL-WR740N | User Guide - Page 101
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure A-4 Virtual Servers Figure A-5 Note: Add or Modify a Virtual server Entry Your opposite side should call your WAN IP, which is displayed on the "Status" page. 4) How to enable DMZ Host: Log in to the Router, click the "...
  • TP-Link TL-WR740N | User Guide - Page 102
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure A-7 4. Basic Security I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will interfere with the WEB management port 80 on the Router, you must change the WEB management port number to avoid ...
  • TP-Link TL-WR740N | User Guide - Page 103
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router (the Router's LAN IP address: Web Management Port) in the address field...a Virtual server Entry The wireless stations cannot connect to the Router. 1) 2) 3) Make sure the "Enable Wireless Router Radio" is checked. Make sure that the wireless...
  • TP-Link TL-WR740N | User Guide - Page 104
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Appendix B: Configuring the PC In this section, we'll introduce how to install and configure the TCP/IP correctly in Windows XP. First make sure your Ethernet Adapter is working, refer to the adapter's manual if necessary. 1. Configure ...
  • TP-Link TL-WR740N | User Guide - Page 105
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 0-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. Now you have two ways to configure the TCP/IP protocol below: Setting IP address automatically Select Obtain an IP ...
  • TP-Link TL-WR740N | User Guide - Page 106
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Figure 0-3 Note: For Windows 98 OS or before, the PC and Router may need to be restarted. Setting IP address manually 1 2 Select Use the following IP address radio button. And the following items available If the Router's LAN IP address is ...
  • TP-Link TL-WR740N | User Guide - Page 107
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Now: Click OK to keep your settings. - 100 -
  • TP-Link TL-WR740N | User Guide - Page 108
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Appendix C: Specifications General Standards Protocols Ports IEEE 802.3, IEEE 802.3u, IEEE802.11n, IEEE802.11b, IEEE 802.11g TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP One 10/100M Auto-Negotiation WAN RJ45 port, Four 10/100M Auto-Negotiation LAN ...
  • TP-Link TL-WR740N | User Guide - Page 109
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router Appendix D: Glossary 802.11b - The 802.11b standard specifies a wireless networking at 11 Mbps using direct-sequence spread-spectrum (DSSS) technology and operating in the unlicensed radio spectrum at 2.4GHz, and WEP encryption for security. ...
  • TP-Link TL-WR740N | User Guide - Page 110
    TL-WR740N/TL-WR741ND 150Mbps Wireless N Router WEP (Wired Equivalent Privacy) - A data privacy mechanism based on a 64-bit or 128-bit or 152-bit shared key algorithm, as described in the IEEE 802.11 standard. Wi-Fi - A trade name for the 802.11b wireless networking standard, given by the ...



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

TP-Link TL-WR740N - 150Mbps Wireless Lite N Router IEEE 802.11n 802.11g 802.11b Built-in Manual