Western Digital WDBLGT0080KBK User Manual - Page 16
Indicators, LCD, Guide for Administrators.
View all Western Digital WDBLGT0080KBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
PRODUCT OVERVIEW Indicators LCD The Liquid Crystal Display (LCD) on the front of the WD Sentinel server is a portal into its status. Normally, the LCD displays the name of the WD Sentinel server that the administrator assigned during initial setup along with its IP address. You can use either of these to discover and communicate with the server. (See the Quick Install Guide for Administrators.) Use the scroll buttons to the right of the LCD to display: Number of drives that are installed Available capacity Status If an alert occurs, or the WD Sentinel server is performing certain operations, the status displays in the LCD: Alert Description Backup Failed Capacity Low Drive Overtemp Ethernet 1 Disconnected Ethernet 2 Disconnected Fan Failed Imminent Drive Failure Initializing Invalid Drive Invalid Drive Capacity Migrating ... % Network Disconnected Power Supply 1 Failed Power Supply 2 Failed Reboot Repairing ... % Shutting Down The server failed to back up a computer. Go to the Dashboard and examine the alerts to discover which computer backup failed. Available storage capacity of the WD Sentinel server is low. The temperature of one of the drives is too high. WD Sentinel server has detected that Ethernet 1 has lost connection. WD Sentinel server has detected that Ethernet 2 has lost connection. WD Sentinel server has detected that the fan is no longer operational. One of the drives is demonstrating imminent failure (discovered through Self-Monitoring Analysis and Reporting Technology S.M.A.R.T). Replace the drive as soon as possible. The RAID system is initializing the storage; this is similar to Verifying. A drive that is not approved for use in the WD Sentinel server has been inserted. A drive with incompatible size was inserted and migration/rebuild could not proceed. RAID system is migrating to a larger capacity due to the addition of a drive. The server is not connected to the network. Power supply 1 has failed or been disconnected. Power supply 2 has failed or been disconnected. WD Sentinel server will reboot. RAID system is being repaired to full RAID protection. WD Sentinel server is shutting down. WD SENTINEL DX4000 12 ADMINISTRATOR'S GUIDE