Western Digital WDBLGT0080KBK User Manual - Page 39
Adding Capacity by Adding a Drive
View all Western Digital WDBLGT0080KBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
MANAGING STORAGE ON THE WD SENTINEL SERVER 6. Using some force, snap the handle shut. 7. Close the door on the front of the server, making sure it snaps shut. The LED remains blank until the rebuild is complete. The rebuild percentage displays on the LCD. Adding Capacity by Adding a Drive To increase capacity, simply insert an additional drive into the system. The system does not have to be turned off or disengaged from its work to do this. The WD Sentinel server automatically recognizes the drive, checks to see if the drive is approved for use in the WD Sentinel server, and reconfigures the RAID to accept the new drive. At the completion of this reconfiguration, the additional capacity is automatically available to the system. No further operation is required. Note: The additional drive must have a minimum available capacity of the smallest drive in the array. For example, a 3 TB drive may be added to an array made up of 2 TB drives, but a 2 TB drive may not be added to an array composed of 3 TB drives. 1. Open the door on the front of the server. 2. Unlock the handle on the empty drive bay and insert the drive into the bay, making sure it is facing the right way and is seated properly. 3. Using some force, snap the handle shut. 4. Close the door. WD SENTINEL DX4000 35 ADMINISTRATOR'S MANUAL