Yamaha 401 Owner's Manual - Page 131

Recalling the Registered Panel Setups Press one of the REGISTRATION MEMORY [1]-[8] button on the panel, then press the [6π†] (INSERT) button to input the number. • Replacing the number Press the [5π†] (REPLACE) button to replace the number at the cursor position with the currently selected Registration Memory number. • Deleting the number Press the [7π†] (DELETE) button to delete the number at the cursor position. • Deleting all numbers Press the [8π†] (CLEAR) button to delete all numbers in the sequence. 6 Press the [F] button to turn the Registration Sequence function on. 7 Press the [DIRECT ACCESS] button, then press the [EXIT] button to CAUTION Settings in the REGISTRATION return to the Main display and confirm whether the Registration SEQUENCE display are auto- Memory numbers are called up according to the sequence programmed above. • Use the TAB [®] button to call up the Registration Memory numbers in the matically saved to the instrument when you exit from this display. However, if you turn the power off without exiting order of the sequence, or use the TAB [√] button to call them up in reverse order. The TAB [√] [®] buttons can only be used for Registration from this display, the settings will be lost. Sequence when the Main display is called up. • When pedal operation has been set in step 3, you can use a pedal to select the Registration Memory numbers in order. The pedal can be used for Registration Sequence no matter which display is called up (except for the display in step 3 above). Returning to the first Sequence in one action In the Main display, press the TAB [√] and [®] buttons simultaneously. This cancels the currently selected Sequence number (the box indicator at the top right goes out). The first Sequence will be selected by pressing one of the TAB [√][®] buttons or by pressing the pedal. The Registration Sequence is indicated at the top right of the Main display, letting you confirm the currently selected number. Saving the Registration Sequence Settings The settings for the Sequence order and how Registration Sequence behaves when reaching the end of the sequence (SEQUENCE END) are included as part of the Registration Memory Bank file. To store your newly programmed Registration Sequence, save the current Registration Memory Bank file. 1 Press simultaneously REGISTRATION MEMORY [REGIST BANK] but- tons [+][-] to call up the REGISTRATION BANK Selection display. 2 Press the [6†] button to save the Bank file (page 70). CAUTION Keep in mind that all Registration Sequence data is lost when changing Registration Memory Banks, unless you've saved it with the Registration Memory Bank file. Registering and Recalling Custom Panel Setups CVP-405/403/401 Owner's Manual 131