Yamaha 401 Owner's Manual - Page 17

Introduction Using Headphones Using Headphones Connect a pair of headphones to one of the [PHONES] jacks located on the bottom left of the instrument. Two sets of standard stereo headphones can be connected. (If you are using only one pair of headphones, you can plug them into either of these jacks.) CAUTION Do not listen with the headphones at high volume for long periods of time. Doing so may cause hearing loss. CVP-405/403 INPUT VOLUME MIC. LINE IN MIC. LINE PHONES MIN MAX CVP-401 Using the Headphone Hanger A headphone hanger is included in the instrument package so that you can hang the headphones on the instrument. Install the headphone hanger using included two screws (4 x 10mm) as shown in the figure. CAUTION Do not hang anything other than the headphones on the hanger. Otherwise, the instrument or the hanger may be damaged. CVP-405/403 CVP-401 Outputting sound from the speaker while headphones are connected 1 Call up the operation display. [FUNCTION]→ [J] UTILITY → TAB[√][®] CONFIG 2 2 Press the [3π†]/[4π†] (SPEAKER) button to select "ON." Outputting sound only from the headphones From the display called up in step 1 above, press the [3π†]/[4π†] (SPEAKER) button to select "OFF." When "OFF" is selected, the speakers will not sound and you can only hear the instrument sound via the headphones. CVP-405/403/401 Owner's Manual 17