Yamaha 401 Owner's Manual - Page 167

Adjusting the Microphone and Harmony Sound 3 Press the TAB [√] button to select the OVERALL SETTING tab display. 3 4 4 6 5 4 Use the [A]-[J] buttons to select the item (parameter) (see below) to be adjusted. 5 Use the [1π†]-[8π†] buttons to set the value. 6 Press the [EXIT] button to exit from the MICROPHONE SETTING dis- play. Adjustable Items (Parameters) in the OVERALL SETTING Tab Display CAUTION Settings in the OVERALL SETTING tab display are automatically saved to the instrument when you exit from the display. However, if you turn the power off without exiting from this display, the settings will be lost. ■ 3BAND EQ EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands, which can be boosted or cut as required to tailor the overall frequency response. The instrument features a high-grade three-band (LOW, MID and HIGH) digital equalizer function for the microphone sound. • Hz Adjusts the center frequency of the corresponding band. • dB Boosts or cuts the level of the corresponding band by up to 12 dB. ■ NOISE GATE This effect mutes the input signal when the input from the microphone falls below a specified level. This effectively cuts off extraneous noise, allowing the desired signal (vocal, etc.) to pass. • SW (Switch) This turns the Noise Gate on or off. • TH. (Threshold) This adjusts the input level at which the gate begins to open. CVP-405/403/401 Owner's Manual 167 Using a Microphone