Yamaha 401 Owner's Manual - Page 200

MIDI Settings CHORD DETECT display Setting the Chord Type for Style Playback via MIDI Receive The explanations here apply to the CHORD DETECT display to be called up in step 4 of the "Basic Operation" on page 196. These settings let you determine the chord type for Style playback, based on the note messages received via MIDI. The note on/off messages received at the channel(s) set to "ON" are recognized as the notes for detecting chords in Style playback. The chords to be detected depend on the fingering type. The chord type will be detected regardless of the [ACMP ON/OFF] or split point settings. When several channels are simultaneously set to "ON," the chord type is detected from merged MIDI data received over the channels. The operation procedure is basically the same as that of the BASS display above. Displaying the Voice Program Change Number Determines whether or not the Voice bank and number are shown in the Voice selection display. This is useful when you want to check which bank select MSB/LSB values and program change number you need to specify when selecting the Voice from an external MIDI device. You can set this in the display called up by the following operations: [FUNCTION] → [J] UTILITY →TAB [√][®] CONFIG 2. Switch the DISPLAY VOICE NUMBER menu ON and OFF. n • The numbers displayed here start from "1." Accordingly the actual MIDI program change numbers are one lower, since that number system starts from "0." • For the GS Voices, this feature is not available (the program change numbers are not shown). 200 CVP-405/403/401 Owner's Manual Using Your Instrument with Other Devices