ZyXEL P-792H v2 User Guide - Page 212
Advanced > QoS > Class Setup: Edit continued
View all ZyXEL P-792H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
Chapter 15 Quality of Service (QoS) Table 64 Advanced > QoS > Class Setup: Edit (continued) LABEL DESCRIPTION 802.1Q Tag Select Same to keep the priority setting and VLAN ID of the frames. Select Auto to map the 802.1 priority level to the DSCP value automatically. Select Remove to delete the priority queue tag and VLAN ID of the frames. Select Mark to replace the 802.1 priority field and VLAN ID with the value you set in the fields below. Ethernet Priority VLAN ID Filter Configuration Source Address Subnet Netmask Port MAC MAC Mask Select Add to treat all matched traffic untagged and add a second priority queue tag and VLAN. Select a priority level (between 0 and 7) from the drop down list box. Specify a VLAN ID number between 2 and 4094. Use the following fields to configure the criteria for traffic classification. Select the check box and enter the source IP address in dotted decimal notation. A blank source IP address means any source IP address. Enter the source subnet mask. Refer to the appendix for more information on IP subnetting. Select the check box and enter the port number of the source. 0 means any source port number. See Appendix F on page 455 for some common services and port numbers. Select the check box and enter the source MAC address of the packet. Type the mask for the specified MAC address to determine which bits a packet's MAC address should match. Exclude Destination Address Subnet Netmask Port MAC Enter "f" for each bit of the specified source MAC address that the traffic's MAC address should match. Enter "0" for the bit(s) of the matched traffic's MAC address, which can be of any hexadecimal character(s). For example, if you set the MAC address to 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56 matches this criteria. Select this option to exclude the packets that match the specified criteria from this classifier. Select the check box and enter the destination IP address in dotted decimal notation. Enter the destination subnet mask. Refer to the appendix for more information on IP subnetting. Select the check box and enter the port number of the destination. 0 means any source port number. See Appendix F on page 455 for some common services and port numbers. Select the check box and enter the destination MAC address of the packet. 212 P-792H v2 User's Guide