ZyXEL P-792H v2 User Guide - Page 232
The DNS Screen
View all ZyXEL P-792H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
Chapter 17 Remote Management Table 73 Advanced > Remote Management > SNMP LABEL DESCRIPTION Apply Click this to save your changes. Cancel Click this to restore your previously saved settings. 17.6 The DNS Screen Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa. Refer to Chapter 7 on page 85 for background information. Use this screen to set from which IP address the P-792H v2 will accept DNS queries and on which interface it can send them your P-792H v2's DNS settings. This feature is not available when the P-792H v2 is set to bridge mode. Click Advanced > Remote MGMT > DNS to change your P-792H v2's DNS settings. Figure 108 Advanced > Remote Management > DNS The following table describes the labels in this screen. Table 74 Advanced > Remote Management > DNS LABEL DESCRIPTION Port The DNS service port number is 53 and cannot be changed here. Access Status Select the interface(s) through which a computer may send DNS queries to the P-792H v2. Secured Client A secured client is a "trusted" computer that is allowed to send DNS IP queries to the P-792H v2. Select All to allow any computer to send DNS queries to the P-792H v2. Apply Cancel Choose Selected to just allow the computer with the IP address that you specify to send DNS queries to the P-792H v2. Click this to save your changes. Click this to restore your previously saved settings. 232 P-792H v2 User's Guide