ZyXEL P-792H v2 User Guide - Page 213
Quality of Service QoS, P-792H v2 User's Guide
View all ZyXEL P-792H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Chapter 15 Quality of Service (QoS) Table 64 Advanced > QoS > Class Setup: Edit (continued) LABEL DESCRIPTION MAC Mask Type the mask for the specified MAC address to determine which bits a packet's MAC address should match. Exclude Others Service Enter "f" for each bit of the specified destination MAC address that the traffic's MAC address should match. Enter "0" for the bit(s) of the matched traffic's MAC address, which can be of any hexadecimal character(s). For example, if you set the MAC address to 00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56 matches this criteria. Select this option to exclude the packets that match the specified criteria from this classifier. This field simplifies classifier configuration by allowing you to select a predefined application. When you select a predefined application, you do not configure the rest of the filter fields. SIP (Session Initiation Protocol) is a signaling protocol used in Internet telephony, instant messaging and other VoIP (Voice over IP) applications. Select the check box and select VoIP(SIP) from the drop-down list box to configure this classifier for traffic that uses SIP. Protocol Packet Length DSCP Ethernet Priority File Transfer Protocol (FTP) is an Internet file transfer service that operates on the Internet and over TCP/IP networks. A system running the FTP server accepts commands from a system running an FTP client. The service allows users to send commands to the server for uploading and downloading files. Select the check box and select FTP from the drop-down list box to configure this classifier for FTP traffic. Select this option and select the protocol (TCP or UDP) or select User defined and enter the protocol (service type) number. 0 means any protocol number. Select this option and enter the minimum and maximum packet length (from 28 to 1500) in the fields provided. Select this option and specify a DSCP (DiffServ Code Point) number between 0 and 63 in the field provided. Select this option and select a priority level (between 0 and 7) from the drop down list box. VLAN ID Physical Port Remote Node Exclude Back Apply Cancel "0" is the lowest priority level and "7" is the highest. Select this option and specify a VLAN ID number between 2 and 4094. Select this option and select a LAN port. Select this option and select a remote node from the drop down list box. When the WAN type is Ethernet in the WAN > Internet Access Setup screen, you can select WAN1 only. Select this option to exclude the packets that match the specified criteria from this classifier. Click this to return to the previous screen without saving. Click this to save your changes. Click this to restore your previously saved settings. P-792H v2 User's Guide 213