ZyXEL P-792H v2 User Guide - Page 73
Configuring More Connections Advanced Setup
View all ZyXEL P-792H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 6 WAN Setup 6.3.2 Configuring More Connections Advanced Setup Use this screen to edit your P-792H v2's advanced WAN settings. Click the Advanced Setup button in the More Connections Edit screen. The screen appears as shown. Figure 28 Network > WAN > More Connections: Edit: Advanced Setup The following table describes the labels in this screen. Table 16 Network > WAN > More Connections: Edit: Advanced Setup LABEL DESCRIPTION RIP & Multicast Setup This section is not available when you configure the P-792H v2 to be in bridge mode. RIP Direction Select the RIP direction from None, Both, In Only and Out Only. RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M. Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish membership in a multicast group. The P-792H v2 supports IGMP-v1, IGMP-v2 and IGMP-v3. Select None to disable it. ATM QoS ATM QoS Type Select CBR (Continuous Bit Rate) to specify fixed (always-on) bandwidth for voice or data traffic. Select UBR (Unspecified Bit Rate) for applications that are non-time sensitive, such as e-mail. Select VBR-nRT (Variable Bit Rate-non Real Time) or VBR-RT (Variable Bit Rate-Real Time) for bursty traffic and bandwidth sharing with other applications. P-792H v2 User's Guide 73