ZyXEL P-792H v2 User Guide - Page 226
The Telnet Screen
View all ZyXEL P-792H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Chapter 17 Remote Management The following table describes the labels in this screen. Table 69 Advanced > Remote Management > WWW LABEL DESCRIPTION Port You may change the server port number for a service, if needed. However, you must use the same port number in order to use that service for remote management. Access Status Select the interface(s) through which a computer may access the P792H v2 using this service. Secured Client A secured client is a "trusted" computer that is allowed to communicate IP with the P-792H v2 using this service. Select All to allow any computer to access the P-792H v2 using this service. Apply Cancel Choose Selected to just allow the computer with the IP address that you specify to access the P-792H v2 using this service. Click this to save your changes. Click this to restore your previously saved settings. 17.3 The Telnet Screen You can use Telnet to access the P-792H v2's command line interface. Specify which interfaces allow Telnet access and from which IP address the access can come. Click Advanced > Remote MGMT > Telnet tab to display the screen as shown. Figure 104 Advanced > Remote Management > Telnet 226 P-792H v2 User's Guide