ZyXEL P-792H v2 User Guide - Page 398
P-792H v2 Access and Login
View all ZyXEL P-792H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 398 highlights
Chapter 38 Troubleshooting 3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Turn the P-792H v2 off and on. 5 If the problem continues, contact the vendor. 38.2 P-792H v2 Access and Login I forgot the IP address for the P-792H v2. 1 The default IP address is 192.168.1.1. 2 If you changed the IP address and have forgotten it, you might get the IP address of the P-792H v2 by looking up the IP address of the default gateway for your computer. To do this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway might be the IP address of the P-792H v2 (it depends on the network), so enter this IP address in your Internet browser. 3 If this does not work, you have to reset the device to its factory defaults. See Section 1.5 on page 28. I forgot the password. 1 The default admin password is 1234, and the default user password is user. 2 If this does not work, you have to reset the device to its factory defaults. See Section 1.5 on page 28. I cannot see or access the Login screen in the web configurator. 1 Make sure you are using the correct IP address. • The default IP address is 192.168.1.1. • If you changed the IP address (Section 7.2 on page 87), use the new IP address. 398 P-792H v2 User's Guide