ZyXEL P-792H v2 User Guide - Page 378
Uploading Firmware and Configuration Files
View all ZyXEL P-792H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 378 highlights
Chapter 35 Firmware and Configuration File Maintenance 3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the following screen. Figure 208 Restore Configuration Example Type the configuration file's location, or click Browse to Choose the Xmodem protocol. Then click Send. 4 After a successful restoration you will see the following screen. Press any key to restart the P-792H v2 and return to the SMT menu. Figure 209 Successful Restoration Confirmation Screen Save to ROM Hit any key to start system reboot. 35.5 Uploading Firmware and Configuration Files This section shows you how to upload firmware and configuration files. You can upload configuration files by following the procedure in Section 35.4 on page 375 or by following the instructions in Menu 24.7.2 - System Maintenance Upload System Configuration File (for console port). Do not interrupt the file transfer process as this may PERMANENTLY DAMAGE YOUR P-792H v2. 35.5.1 Firmware File Upload FTP is the preferred method for uploading the firmware and configuration. To use this feature, your computer must have an FTP client. 378 P-792H v2 User's Guide