2006 Ducati Multistrada 1000 DS Owners Manual - Page 182

General cleaning To preserve the surface finish on metal parts and paintwork, wash and clean your motorcycle at regular intervals, depending on the condition of the roads you are using. Use only specific products, biodegradable if possible. Avoid aggressive detergents or solvents. Important Do not wash your motorcycle right after use. When the motorcycle is still hot, water drops will evaporate faster and spot hot surfaces. Never clean the motorcycle using hot or high-pressure water jets. Cleaning the motorcycle with water cleaners may lead to seizure or severe failure of front fork, wheel hub assembly, electric system, front fork seals, air inlets or exhaust silencers and adversely affect the operation of motorcycle safety features. If needed, clean off stubborn dirt or grease from engine parts using a degreasing agent. Be sure to avoid contact with drive parts (chain, sprockets, etc.). Rinse with warm water and dry all surfaces with chamois leather. Warning Loss of braking may occur immediately after washing the motorcycle. Never grease or lubricate the brake discs. Loss of braking power and accidents may occur. Clean the discs with an oil-free solvent. E 83