1996 Ford Explorer Owner's Manual - Page 265
1996 Ford Explorer Manual
Page 265 highlights
Driving Your Explorer If Brakes Pull s Check tire pressure. s If pull occurs during the first 500 miles (800 km), make 10 moderatley fast stops from 40 mph (64 km/h). It may be necessary to repeat this operation to properly seat new brakes. If pull occurs during the first 500 miles (800 km), make 10 moderately fast stops from 40 mph (65 km/h) and then perform the self-adjustment procedure above. It may be necessary to repeat this operation to properly seat new brake linings and pads. Stopping Distances Stopping distances vary with different loads and driving conditions. Use caution when encountering new conditions and acquaint yourself with vehicle performance. Take full advantage of engine braking power when slowing down. Applying the Brakes Apply the brake pedal gradually. Use the "squeeze" technique - push on the brake pedal with a steadily increasing force. This allows the wheels to continue to roll while you are slowing down, which lets you steer properly. Do not drive with your foot resting on the brake pedal. This will increase your vehicle's stopping distance and may also cause brake damage. RWARNING If you are driving down a long or steep hill, shift to a lower gear. Do not apply your brakes continuously, as they may overheat and become less effective. 265