1996 Ford Explorer Owner's Manual - Page 376
1996 Ford Explorer Manual
Page 376 highlights
Manual Transmission and Transfer Case Fluid Checking the Manual Transmission Fluid Clean the filler plug on the side of the case. Remove the filler plug. The fluid level should be up to the bottom of the filler plug hole. If additional fluid is required: 1. Add enough fluid through the filler plug hole to bring the level up to the bottom of the hole. Use only fluid certified to meet Ford Motor Company lubricant specification as listed under Refill Capacities, Motorcraft Parts, and Lubricant Specifications, later in this chapter. 2. Replace the filler plug in its original position, making sure it is fully seated. The Clutch The clutch on your vehicle is automatically self-adjusting and should not require any routine service. During normal operation the fluid level in the clutch reservoir will slowly rise. If for any reason the fluid level drops, maintain the fluid level at the step in the reservoir body. If it becomes necessary to remove the reservoir cap, thoroughly clean the reservoir cap before removing it to prevent dirt or water from entering the reservoir. Remove the internal diaphragm and then add only a DOT 3 brake fluid such as Ford High Performance DOT 3 Brake Fluid, meeting Ford specification ESA-M6C25-A. 376