1996 Ford Explorer Owner's Manual - Page 370

s Local regulations may prohibit or restrict the use of tire chains. Investigate the laws and regulations in your area before installing chains. s Put the chains on tightly with the ends held down securely. Verify that no chain touches any wiring, brake lines, or fuel lines. Follow the chain manufacturer's instructions. s Drive slowly. If you can hear the chains rub or bang against your vehicle, stop the vehicle and tighten the chains. If you continue to hear the chains rub or bang against your vehicle, remove the chains to prevent damage to your vehicle. s Avoid fully loading your vehicle if possible. s Tire chains may affect vehicle handling. Drive carefully and avoid hard braking. Remove tire chains at the first opportunity after using them on snow and ice. Do not use the chains on dry roads. s Make sure your suspension insulation and bumpers are not missing or worn to avoid damage to your vehicle. Cleaning the Wheels Wash the wheels with the same detergent you use to wash your vehicle's body. Do not use acid-based wheel cleaners, steel wool, abrasives, fuel, or strong detergents. These substances will damage protective coatings. Use tar and road oil remover to remove grease and tar. NOTE: Before going to a car wash, find out if the brushes are abrasive. If you have raised white letter tires that are difficult to clean with regular detergent, use whitewall tire cleaner. Follow the directions on the container and rinse the tires with plenty of clean water. 370