1996 Ford Explorer Owner's Manual - Page 298
1996 Ford Explorer Manual
Page 298 highlights
Attaching jumper cables Jump-Starting 1. Make sure that the jumper cables are not in the way of moving engine parts, then start the booster vehicle. Run the engine at a moderate speed. 2. Let the discharged battery charge for a few minutes and then start the disabled vehicle. It may take a couple of tries before the vehicle starts. If the vehicle does not start after several attempts, there may be a different problem. 3. When both vehicles are running, let them idle for a few minutes to charge the discharged battery. Removing jumper cables 1. Always remove the jumper cables in the reverse order. Remove the negative ( ) end of the jumper cable from the metallic surface on the engine or frame of the disabled vehicle. 2. Remove the negative ( ) cable from the booster battery. 3. Remove the positive (+) cable from the booster battery. 298