2015 Kawasaki KX250F Owners Manual - Page 111
2015 Kawasaki KX250F Manual
Page 111 highlights
110 MAINTENANCE AND ADJUSTMENT Spring Preload Adjuster Settings Front Fork Oil Change j • Thoroughly clean the forks before disassembly. NOTICE Be careful not to scratch the inner tube and not to damage the dust seal. Avoid scratching or damaging the inner tube or the dust seal. Use a mild detergent and sponge out dirt with plenty of water. ○Record the rebound, compression and spring preload setting before disassembling. ○Set the rebound and compression damping to the A. Seated Position (Adjuster Turned Fully Counterclockwise) B. Harder (Clockwise) C. Softer (Counterclockwise) D. Standard Setting NOTE softest settings before disassembly to prevent the needle of adjusters from damping. *: Number of turns clockwise usable range 40 clicks or more. Standard Spring Preload Adjuster Setting 8 clicks* *: Clockwise from the fully seated position the number plate (see Steering section). • Remove Loosen the fork clamp bolts (upper). • Loosen the front front fork top plug with the top plug • wrench (special tool: 57001-1645). ○Do not take off the base valve assembly (left fork only). NOTE