2015 Kawasaki KX250F Owners Manual - Page 190

2015 Kawasaki KX250F Manual

Page 190 highlights

TUNING 189 Suspension Tuning According the Type of Course Lower the front end slightly (Increase the amount of fork tube protrusion above the steering stem head by 5 mm Many Corners (0.20 in.).). This accelerates steering and enhances turning ability. Raise the front end slightly (Decrease the amount of fork tube protrusion above the steering stem head by 5 mm (0.20 in.).). This slows down steering and enhances stability at high speed. Raise the front end slightly to gain stability. Fast Course Use this procedure to determine if the suspension is balanced reasonably well. Hold the motorcycle upright (remove the side stand.). While standing next to the machine, lightly pull the brake lever, place one foot on the footpeg closest to you, and push down hard. If the motorcycle stays level as the suspension is compressed, the spring rates are well balanced. Sit astride the motorcycle, take a riding posture and check that the machine is in a horizontal position. If one end drops noticeably more than the other, the front and rear are not compatible and must be readjusted to achieve a better balance. Front and Rear Suspension Compatibility Inspection • • • j Deep Dips or Sandy Ground Begin the actual on-track testing and evaluation after making these preliminary adjustments. Bear in mind the following points when readjusting the suspension. Always make changes in small steps. The rider must be consistent in evaluating suspension performance. A change in the front suspension might require one in the rear suspension, and vise versa. • • •

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202

TUNING
189
j
Suspension
Tuning
According
the
Type
of
Course
Many Corners
Lower the front end slightly
(Increase the amount of fork
tube protrusion above the
steering stem head by 5 mm
(0.20 in.).). This accelerates
steering and enhances
turning ability.
Fast Course
Raise the front end slightly
(Decrease the amount of
fork tube protrusion above
the steering stem head by 5
mm (0.20 in.).). This slows
down steering and enhances
stability at high speed.
Deep Dips or
Sandy Ground
Raise the front end slightly to
gain stability.
Begin the actual on-track testing and evaluation
after making these preliminary adjustments.
Bear in mind the following points when readjusting
the suspension.
Always make changes in small steps.
The rider must be consistent in evaluating suspen-
sion performance.
A change in the front suspension might require
one in the rear suspension, and vise versa.
Front
and
Rear
Suspension
Compatibility
Inspection
Use this procedure to determine if the suspension
is balanced reasonably well.
Hold the motorcycle upright (remove the side
stand.).
While standing next to the machine, lightly pull the
brake lever, place one foot on the footpeg closest
to you, and push down hard.
If the motorcycle
stays level as the suspension is compressed, the
spring rates are well balanced.
Sit astride the motorcycle, take a riding posture
and check that the machine is in a horizontal po-
sition. If one end drops noticeably more than the
other, the front and rear are not compatible and
must be readjusted to achieve a better balance.