2015 Kawasaki KX250F Owners Manual - Page 42
2015 Kawasaki KX250F Manual
Page 42 highlights
MAINTENANCE AND ADJUSTMENT 41 the spring to the oil filter cap. • Install the oil filter cap with the grease applied to • Install a new O-ring and tighten its bolts to the specified torque. Tightening Torque Engine Oil Drain Bolt: 20 N·m (2.0 kgf·m, 15 ft·lb) j ○Replace the gasket and O-ring with a new one. NOTE the engine up to the high level line with good • Fill quality engine oil specified in the table. Recommended Engine Oil Castrol "Power1 Racing 4T" 5W-40 or "Kawasaki Performance 4-Stroke Full Synthetic Oil*" 10W-40 or "Kawasaki Performance 4-Stroke Semi-Synthetic Oil*" 10W-40 or "Kawasaki Performance 4-Stroke Motorcycle Oil*" 10W-40 A. Spring B. O-ring C. Oil Filter Cap Tightening Torque Oil Filter Cap Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb) the oil has completely drained out, install the • After drain bolt with its new gasket. Proper torque for it is shown in the table. *Kawasaki Performance Oils and Lubricants have been specifically engineered for your vehicle. Consistent use of these products meets or exceeds service requirements and can help to extend the life of your Kawasaki. Engine Oil Capacity Capacity: 0.75 L (0.79 US qt) (When filter is not removed) 0.80 L (0.85 US qt) (When filter is removed) 1.0 L (1.1 US qt) (When engine is completely dry)