2015 Kawasaki KX250F Owners Manual - Page 152

MAINTENANCE AND ADJUSTMENT 151 a non-permanent locking agent to the front • Apply fork clamp bolts (upper). the front fork clamp bolts (upper) to the • Tighten specified torque. Tightening Torque Front Fork Clamp Bolts (Upper): 20 N·m (2.0 kgf·m, 15 ft·lb) the front wheel assembly between the fork • Put legs, and insert the front brake disc into the front • Install the front brake caliper to the fork leg, and tighten the front caliper mounting bolts to the specified torque. Tightening Torque Front Axle Nut: 78 N·m (8.0 kgf·m, 58 ft·lb) the left front axle clamp bolts to the spec• Tighten ified torque. Tightening Torque Left Front Axle Clamp Bolts: 23 N·m (2.3 kgf·m, 17 ft·lb) • • • brake pads. Insert the front axle from the right side of the motorcycle. Tighten the right front axle clamp bolts temporary. Tighten the front axle nut to the specified torque. j Tightening Torque Front Caliper Mounting Bolts: 25 N·m (2.5 kgf·m, 18 ft·lb) out wood wedge between the disc brake • Take pads. high-temperature grease to the grease • Apply seals of the wheel. the collars on the left and right side of the • Install hub. ○Tighten the two clamp bolts alternately two times to ensure even tightening torque. NOTE