2015 Kawasaki KX250F Owners Manual - Page 71
2015 Kawasaki KX250F Manual
Page 71 highlights
70 MAINTENANCE AND ADJUSTMENT the claw on the air cleaner duct clamp • Position between the projections. the rear frame mounting bolts to the spec• Tighten ified torque. Tightening Torque Rear Frame Mounting Bolts: 34 N·m (3.5 kgf·m, 25 ft·lb) the joint lock for deformation and wear. • Check the joint lock is deformed, replace the fuel hose • If with a new one. engine oil to the fuel outlet pipe lightly. • Apply Connect the upstream injector connector and in• take air temperature sensor connector. the fuel hose joints straight onto the delivery • Insert pipes. • Push the joint locks until the hose joints clicks. A. Claw B. Projections j the intake air pressure sensor connector, • Connect downstream injector connector and throttle sensor connector. Install the rear frame with the air cleaner housing to the throttle body assy. Check the air cleaner duct is installed securely. Tighten the air cleaner duct clamp screw securely. Tighten the throttle body assy holder clamp bolt to the specified torque. Tightening Torque Throttle Body Assy Holder Clamp Screw: 2.0 N·m (0.20 kgf·m, 18 in·lb) A. Fuel Hose Joints B. Joint Locks