2015 Kawasaki KX250F Owners Manual - Page 98
2015 Kawasaki KX250F Manual
Page 98 highlights
MAINTENANCE AND ADJUSTMENT 97 the washer and new cotter pin. • Install • Bend the longer end of the cotter pin. j A. Footpeg Bracket Bolts B. Footpeg Bracket a non-permanent locking agent to • Apply bracket bolts. either footpeg position and tighten • Select bracket with the two bolts. Tightening Torque Footpeg Bracket Bolts (Upper): 34 N·m (3.5 kgf·m, 25 ft·lb) Footpeg Bracket Bolts (Lower): 16.5 N·m (1.68 kgf·m, 12.2 ft·lb) the the A. B. C. D. Pivot Pin Spring Ends Washer Cotter Pin ○Install NOTE grease to the pivot pin. • Apply Install the footpeg, spring and pivot pin. Insert the • pivot pin from the front. • Position the spring ends as shown in the figure. the footpegs with same height on both sides. Do not ride the motorcycle with footpegs installed unevenly. ○Adjust the positions of the shift pedal and the brake pedal to suit the rider's preference. ○Installing the footpegs in the lower position will reduce the amount of ground clearance and lean angle.