2015 Kawasaki KX250F Owners Manual - Page 78
2015 Kawasaki KX250F Manual
Page 78 highlights
MAINTENANCE AND ADJUSTMENT 77 molybdenum disulfide grease to the steel • Apply ball and the contact area of the push rod holder. • Install the steel ball and the push rod holder. cable bracket while pushing the release shaft lever lightly forward. j A. Apply molybdenum disulfide grease. B. Push Rod Holder C. Steel Ball A. B. C. D. Release Shaft Lever Push forward. Position Distance Cable Bracket the clutch pressure plate and springs. • Install Tighten • torque. the clutch spring bolts to the specified Tightening Torque Clutch Spring Bolts: 9.0 N·m (0.92 kgf·m, 80 in·lb) the release shaft lever position by measur• Check ing the position distance between the lever and the Position Distance Standard 49.2 ∼ 56.5 mm (1.94 ∼ 2.22 in.) the lever position is not within the standard, se• If lect the correct thickness of adjusting washer ac- • cording to the following table. Remove the push rod holder as necessary and reinstall the clutch.