2010 Mercedes S-Class Owner's Manual - Page 321
2010 Mercedes S-Class Manual
Page 321 highlights
Automatic transmission Shifting into neutral position N X X 319 With the vehicle at a standstill, depress the brake pedal. X Move the gear selector lever up or down to the resistance point to select neutral position N. When you turn off the engine, the automatic transmission will shift into neutral position N automatically. SmartKey: Removing the SmartKey from the starter switch or opening a front door after turning off the engine will shift the automatic transmission into park position P automatically. KEYLESS-GO: Opening a front door after turning off the engine will shift the automatic transmission into park position P automatically. Remaining in neutral position N If you want the automatic transmission to remain in neutral position N, e.g. when taking the vehicle through an automatic conveyortype car wash, observe the following instructions. If engaged release the electronic parking brake manually. X Switch off the ignition and leave the SmartKey in the starter switch. With KEYLESS-GO: X X G Warning! Make sure the ignition is switched on. With the vehicle at a standstill, depress the brake pedal and keep it pressed. X Shift the automatic transmission into park position P. X Release the brake pedal. X Remove the KEYLESS-GO start/stop button from the starter switch. X Insert the SmartKey into the starter switch. X Switch on the ignition. X Depress the brake pedal and keep it pressed. X Shift the automatic transmission into neutral position N. X Release the brake pedal. X If engaged release the electronic parking brake manually. X Switch off the ignition and leave the SmartKey in the starter switch. When leaving the SmartKey in the starter switch, do not leave children unattended in the vehicle. It is possible for children to switch on the ignition which could result in unsupervised use of vehicle equipment. Unsupervised use of vehicle equipment could result in an accident and/or serious personal injury. Shifting into reverse gear R X With the vehicle at a standstill, depress the brake pedal. X Move the gear selector lever up past the resistance point. Shifting into drive position D X With SmartKey: X X Make sure the ignition is switched on. With the vehicle at a standstill, depress the brake pedal and keep it pressed. X Shift the automatic transmission into neutral position N. X Release the brake pedal. With the vehicle at a standstill, depress the brake pedal. X Move the gear selector lever down past the resistance point. Shifting procedure The automatic transmission selects individual gears automatically, depending on Z Controls in detail
![](/manual_guide/autos/2010-mercedes-sclass-owners-manual-a211ad0/321.png)