2010 Mercedes S-Class Owner's Manual - Page 534

532 Rims and tires Electrical system S 65 AMG Spark plugs, electrode gap Spark plugs, tightening torque 0.028 in (0.7 mm) 15 - 22 lb-ft (20 - 30 Nm) Benz can be identified by finding the following on the tire's sidewall: RMO = Mercedes-Benz Original equipment tires Using tires other than those approved by Mercedes-Benz may result in damage that is not covered by the Mercedes-Benz Limited Warranty. Technical data Main dimensions S 65 AMG Overall vehicle length Overall vehicle width57 Overall vehicle height Wheelbase Track, front Track, rear Turning circle 207.1 in (5 261 mm) 83.5 in (2 120 mm) 58.7 in (1 490 mm) 124.6 in (3 165 mm) 63.0 in (1 600 mm) 63.2 in (1 606 mm) 40.0 ft (12.2 m) ! Using tires other than those approved by Mercedes-Benz can have detrimental effects, such as Rpoor handling characteristics Rincreased Rincreased noise fuel consumption Moreover, tires and rims not approved by Mercedes-Benz may, under load, exhibit dimensional variations and different tire deformation characteristics that could cause them to come into contact with the vehicle body or axle parts. Damage to the tires or the vehicle may be the result. Weights S 65 AMG Roof load Trunk load max. 220 lb (100 kg) max. 220 lb (100 kg) Rims and tires Notes ! Only use tires which have been tested and approved by Mercedes-Benz. Tires approved by Mercedes-Benz are developed to provide best possible performance in conjunction with the driving safety systems on your vehicle such as the ABS or the ESC. Tires specially developed for your vehicle and tested and approved by Mercedes- i Further information on tires and rims is available at any authorized Mercedes-Benz Center. The Tire and Loading Information placard with the recommended tire inflation pressures for cold tires is located on the driver's door B-pillar. Supplemental tire inflation pressure information for driving at high speeds or for vehicle loads less than the maximum loaded vehicle condition can be found on the tire inflation pressure label. The tire inflation pressure label is located on the inside of the fuel filler flap. The tire inflation pressure should be checked regularly and should only be adjusted on cold tires. Follow tire manufacturer's maintenance recommendation included with the vehicle. For information on recommended tire inflation pressure and supplemental tire inflation pressure information for special driving situations, see (Y page 411). 57 Exterior rear view mirrors folded out.