2010 Mercedes S-Class Owner's Manual - Page 453

Where will I find ...? X 451 Take the collapsible wheel chock from the vehicle tool kit (Y page 450). Storage position X X X Jack G Warning! Only use the jack supplied with your vehicle to lift the vehicle briefly for wheel changes. If you use the jack for any other purpose, you or others could be injured, as the jack is designed only for the purpose of changing a wheel. When using the jack, observe the safety notes in the "Mounting the spare wheel" section and the notes on the jack. X Operational position X Turn the crank handle clockwise. Before placing the jack back into the vehicle tool kit: X Fully collapse the jack. X Fold in the crank handle (storage position). Take the jack from the vehicle tool kit (Y page 450). Spare wheel The spare wheel is located in the space underneath the trunk floor. X Removing: Open the trunk (Y page 279). X Lift the trunk floor using the floor handle. X Engage the trunk floor handle on the upper trunk lip. G Observe Safety notes, see page 508. ! To prevent damage, always disengage the floor handle from the upper trunk lip and Z Practical hints Setting up: Tilt both plates upward :. Fold the lower plate outward ;. X Guide the tabs of the lower plate all the way into the openings of base plate =. For information on where to place wheel chocks when changing a wheel, see "Lifting the vehicle" (Y page 509). Turn the crank handle in the direction of arrow as far as it will go.