3Com NJ220 User Manual - Page 6
About the IntelliJack, The following diagram shows the front view of the IntelliJack - power adapter
![]() |
UPC - 662705476865
View all 3Com NJ220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2 CHAPTER 1: INSTALLING THE NJ220 INTELLIJACK About the IntelliJack • MAC filtering • 802.1x port security • User-configured VLAN IDs for management packets • Port-based "calendar" function The following diagram shows the front view of the IntelliJack: 1 Switched ports with LEDs Allow up to four devices to be connected to the network. A green LED indicates connection status when a device is using a particular port. Port number 1 is also a power-forwarding port; it can be used with any standard networking device as well as to power a VoIP telephone on a network that uses IEEE 802.3af-compatible Power Over Ethernet. An additional LED indicates when the port is forwarding power to a device connected to that port. 2 Slot for adapter plate Can be fitted with an adapter plate, which can be installed with up to two pass-through ports. 3 Adapter plate with installed pass-through port connector Can be used for voice or other networking applications. The port bypasses the functionality of the switch, allowing you to set up a connection to a separate network segment or to connect to an analog or digital PBX telephone. The adapter plates are available from 3Com. However, you must purchase the connectors from the manufacturer. See "Installing the Adapter Plate and Pass-Through Ports" on page 8 for more information.
![](/manual_guide/products/3com-3cnj220crm-user-manual-2cc46dc/6.png)