Adaptec LSM-FC2002 Installation Guide - Page 35
Configuration Rules, Supported Host Bus Adapters, QLogic, QLA-2300
UPC - 760884145067
View all Adaptec LSM-FC2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
35 Configuration Rules These rules must be applied when implementing the 2Gb SANbloc Series configurations: • When daisy chaining, both 2Gb enclosures must be configured identically. • 1Gb and 2Gb systems cannot be daisy chained together. • Two LS modules and two I/O modules are required for dual drive loops. • Cannot mix optical and copper I/O modules in the same enclosure (both I/O Modules must be the same). • Cannot mix 1Gb and 2Gb LS and I/O modules, and 1Gb and 2Gb cables. • 2Gb JBOD enclosures require 2Gb cables. • 2Gb JBOD enclosures require 2Gb disk drives. • Disk drive blanks must be ordered for any empty drive slots. Supported Host Bus Adapters Only the following QLogic Host Bus Adapters should be used with the 2Gb SANbloc Series enclosures: • QLA-2300 (Rev. C or higher) • QLA-2310 (Rev. C or higher) Configuration Rules