Adaptec LSM-FC2002 Installation Guide - Page 68
Table 5-1, Enclosure LED Descriptions, Description, Color, Indication
![]() |
UPC - 760884145067
View all Adaptec LSM-FC2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
68 Table 5-1 Enclosure LED Descriptions LED 0 LED 1 LED 2 LED 3 LED 4 LED 5 Description Color Indication Power On Shelf Fault Green Amber FC Loop A FC Loop B LS Fault Green Green Amber 2Gb Operation Green Normally ON, indicates power is applied. OFF indicates no power. Normally OFF indicates no faults exist in the enclosure. ON indicates a fault. Flashing of this LED indicates the both a 1GB and a 2Gb I/O module has been detected. ON indicates FC Loop A closed. OFF indicates FC Loop A open ON indicates FC Loop B closed. OFF indicates FC Loop B open. Normally OFF indicating that the LS Module has no fault. ON indicates an LS Module fault. Flashing of this LED indicates that the LS is a 1GB LS module in a 2Gb system. ON indicates the FC loop is operating at 2Gb/Sec speed. OFF indicates the FC Loop is operating at 1GB/Sec Speed. Flashing of this LED indicates that the LS module is set to an incorrect speed. Note: The audible alarm will sound when an error is detected. CAUTION: If 1GB and 2Gb hardware is mixed in an enclosure at power up, and the enclosure is set to 2Gb, the drives will not spin up and LED 5 will flash. LS Module
![](/manual_guide/products/adaptec-lsmfc2002-installation-guide-2354386/68.png)