Asus DA-3000 Owners Manual - Page 13
Rear panel, CAUTION
View all Asus DA-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Rear panel 2 - Names and Functions of Parts o L/R ANALOG INPUTS (BALANCED) These balanced analog XLR input connectors have a default nominal input level of +4 dBu, but it can also be set to +6 dBu. (1: GND, 2: HOT, 3: COLD) (See "Setting the reference level" on page 25.) p L/R ANALOG INPUTS (UNBALANCED) These analog RCA pin input jacks have a nominal input level of −10 dBV. a L/R ANALOG OUTPUTS (UNBALANCED) These analog RCA pin output jacks have a nominal output level of −10 dBV. s L/R ANALOG OUTPUTS (BALANCED) These balanced analog XLR output jacks have a nominal output level of +4 dBu, but it can also be set to +6 dBu. (1: GND, 2: HOT, 3: COLD) (See "Setting the reference level" on page 25.) d DIGITAL IN(S/PDIF / CASCADE) These are digital audio input connectors. This digital input jack has a sampling rate converter that supports 32 -192 kHz. (See "Using the sampling rate converter" on page 23.) When connecting this unit to cascade multiple units, connect the DIGITAL OUT(S/PDIF / CASCADE) jack of another unit to this jack. (See "Connections and preparations" on page 42.) f DIGITAL OUT(S/PDIF / CASCADE) This digital output jack can output digital audio in IEC60958-3 (S/PDIF) format. To connect multiple DA-3000 units, connect the DIGITAL IN (S/PDIF / CASCADE) jack of another unit to this jack. (See "Connections and preparations" on page 42.) g DIGITAL IN (AES/EBU) This balanced XLR digital audio input jack supports the input of AES3-2003/IEC60958-4 (AES/EBU) format digital audio. This digital input jack has a sampling rate converter that supports 32 -192 kHz. (See "Setting the reference level" on page 25.) h DIGITAL OUT (AES/EBU) This balanced XLR digital audio output jack can output digital audio in AES3-2003/IEC60958-4 (AES/EBU) format. CAUTION When the DIGITAL IN/OUT (SDIF-3) connectors are connected, the DIGITAL IN/OUT (S/PDIF / CASCADE) and DIGITAL IN/OUT (AES/EBU) connectors cannot be used to input and output digital audio signals. j DIGITAL IN/OUT(SDIF-3) connectors These are digital audio input and output connectors for DSD signals. These are digital audio input and output connectors for the SDIF-3 (DSD-raw) format. Each connector carries either the left or right channel of the stereo signal. CAUTION When the DIGITAL IN/OUT (SDIF-3) connectors are connected, all digital audio devices (including this unit) in the system must be synchronized to the same clock source. To sync this unit to an external clock, input a 44.1kHz clock signal through its WORD SYNC IN connector. If the clock master within the system is set to 44.1kHz, DSD audio sources will become clock slaves. For details see, "Setting the master clock" on page 25. k WORD SYNC IN connector Use to input a word clock signal. When syncing this unit to an external clock signal, the word clock signal input through this connector is used. l WORD SYNC THRU/OUT connector This is a BNC word clock through/output connector that can output a word clock signal (thru or 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz or 192kH). Use the THRU/WORD OUT switch to change between thru and word output. ; 75Ω ON/OFF [THRU/WORD OUT] switch Use to make the following settings. o W hether or not the WORD SYNC IN connector has termination resistance (75 Ω) o W ORD SYNC THRU/OUT connector THRU/OUT setting z AC IN connector Connect the included power cord here. TASCAM DA-3000 13