Asus DA-3000 Owners Manual - Page 29
Setting the automatic mark function, Adding marks manually during recording
View all Asus DA-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4 - Recording Setting the automatic mark function By turning the AUTO MARK options ON, marks can be added automatically whenever the OVER indicator lights or an external clock synchronization error occurs. Use of this function allows you to quickly find and check problems that occurred in the system during recording. 1. Press the MENU button repeatedly to open the REC FUNC menu, and turn the MULTI JOG dial to select AUTO MARK. 2. Press the MULTI JOG dial to open the AUTO MARK screen. • You can also add marks during track playback. (See "Adding marks manually during playback" on page 40.) • When adding a mark manually, the Mark Name "MARKxxx" * is used. * "xxx" is a number that increments through all MARKs in this track. Using the oscillator (OSC) The unit can output a sine wave at a standard level. You can choose from three output frequencies for the sine wave. Use this to check connections, for example. 1. Press the MENU button to open the UTILITY menu, and turn the MULTI JOG dial to select OSC. 3. Turn the MULTI JOG dial to select the OVERitem. (When OVER is ON, a mark is added automatically whenever an OVER level meter indicator lights.) Options: OFF (default), ON 4. Press the MULTI JOG dial to confirm the setting. The cursor moves to the UNLOCK item. 5. Turn the MULTI JOG dial to select UNLOCK. (When ON, marks will be added when the unit unlocks from the external clock.) Options: OFF (default), ON 6. Press the MULTI JOG dial to confirm the selection and return to the menu screen. NOTE • When an OVER occurs, the Mark name is "OVERxxx" *. • When an UNLOCK even occurs, the Mark name is "UNLKxxx" *. * "xxx" is a number that increments through all MARKs in this track. Adding marks manually during recording You can add marks at the positions you want while recording and use those marks to change positions quickly during track playback. NOTE During recording, adding marks is possible, but moving to and deleting those marks is not possible. Moving to and deleting marks is only possible when the track is stopped, in playback standby or playing back. (See "Locating to marks" on page 40.) (See "Deleting marks" on page 40.) Adding marks when recording During track recording, press the MULTI JOG dial (or remote control MARK button) at any point where you want to add a mark. NOTE • A maximum of 99 marks can be added to each track. Mark information is stored in the track file. 2. Press the MULTI JOG dial to open the OSCILLATOR screen. 3. Turn the MULTI JOG dial to select the frequency of the oscillator. Options: 440Hz, 1kHz (default), 10kHz 4. Press the MULTI JOG dial to confirm the oscillator frequency, and turn the oscillator ON. A sine wave is output, and the level meters show the level of the oscillator. Press the MULTI JOG dial again to turn the sine wave output OFF or ON again as necessary. 5. Press the EXIT/CANCEL [PEAK CLEAR] button or MENU button to return to the menu screen. TASCAM DA-3000 29